Powys · Wales
Bath Re-enamelling in Gwern
Full bath re-enamelling and resurfacing at your home in Gwern, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that is seen better days
- Stains that will not shift
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
How we handle bath re-enamelling in Gwern
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We are frequently asked to fix chips and rust in more than one place and an old resurfacing that’s failing, on pressed steel baths, Victorian roll-tops and basins & shower trays.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Gwern (SY22)
- County
- Powys
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Gwern
Other services in Gwern
What we do, step by step
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
What a repair can’t fix
In fairness, some problems need a different fix:
- A bath that’s rusted through
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
When to call us in Gwern
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The most common problems we are called about are:
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- An old resurfacing that’s failing
What your quote should include
- What prep work is covered
- When it can be used again
- Whether the price is fixed and includes VAT
- How the colour is matched
Gwern questions
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Straight answers about what a repair can do
- Typically one visit, start to finish
- A fixed quote before booking
- Colour mixed on the day to match
See our full price list and bath cost comparison.
Our work in Gwern
Gwern is about 9 miles south-west of Oswestry, in Powys. Customers in Gwern get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Our repair technicians cover all 234 towns and villages across Powys, from the larger towns to small villages. Our jobs stretch from Gwern to Liverpool (46 miles away).
All of SY22 is within our area, from the main roads to the quietest streets. We also cover the places around Gwern: Bwlch-y-cibau (2 miles south-west), Peniarth (2 miles south-west), Llanfyllin (3 miles west), Bachie Ganol (3 miles west) and New Mills (4 miles west). Within a short drive, we also cover Y Trallwng (8 miles south), Bron-y-Buckley (7 miles south), Cegidfa (5 miles south-east), Montgomery (14 miles south), Llanfair Caereinion (10 miles south-west) and Four Crosses (5 miles east).
Landmarks near Gwern
Around Gwern, we work in homes near St Garmon's Church, Plas-yn-dinas Public House and Llanfechain C.I.W. School. Further afield, we also cover the area around Domen Castell (within half a mile north-west). Open spaces near Gwern include Llyn Du and Long Hill.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Looking after it afterwards
So the finish stays in good condition for years:
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
- Do not use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
