Cornwall · England
Bath re-enamelling & resurfacing in Newbridge, Cornwall
We travel to Newbridge for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A coating lifting around the plughole
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Bath re-enamelling in Newbridge without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s a roll-top that’s seen better days and brown or grey marks that don’t clean off, we can help.
You get a one-year guarantee, the same in Newbridge as everywhere else we work.
- Where
- Newbridge (TR20)
- Region
- Cornwall
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Covering Newbridge
Newbridge is about 3 miles west of Penzance, in Cornwall. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Newbridge is one of 644 places in Cornwall we cover.
All of TR20 is covered. If you’re just outside Newbridge, we cover Lower Bodinnar (1 mile north), Little Bosullow (2 miles north), Bojewyan (3 miles north-west), Tregeseal (3 miles west) and Pendeen (3 miles north-west). Larger places within reach include Camborne (15 miles north-east), Penzance (3 miles east), Helston (15 miles east), Hayle (10 miles north-east), St Ives (8 miles north-east) and Rosewarne (15 miles north-east).
Around Newbridge
Our customers here include homes close to Mounts Bay Academy. Newbridge’s nearest station is Penzance station, about 3.3 miles east of the centre. Further afield, we also cover the area around West Cornwall Hospital (3 miles east) and National Gypsy Museum (2.1 miles south-east). Not far away are Carn Kenidjack and Baker's Pit Nature Reserve.
Repairing versus replacing in Newbridge
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
What you get with us
- We come to you, anywhere in the UK
- Colour-matched on site
- Most jobs done in one visit
- Nothing taken out or refitted
See our pricing or guide to resurfacing and replacement costs.
What we do, step by step
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Let the surface dry out before the visit
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Read more
Landlords, agents and businesses in Newbridge
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
What we’re called out for in Newbridge
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Signs it’s time to call us include:
- A coloured bath you want in white
- A dull, rough surface that won’t come clean
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
Comparing quotes
- What happens if they find more damage
- How to care for the finish
- How long it needs to cure
- How long the guarantee is and what it covers
Questions from Newbridge
Which areas do you work in?
Across the UK. Prices don’t change with location.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Nearby places to Newbridge
Also in Newbridge
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
