Hampshire · England

Bath re-enamelling & resurfacing in Newtown, Hampshire

Damaged bath in Newtown? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • An old resurfacing that is failing
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Newtown homes

When to call us in Newtown

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

Common reasons people in Newtown contact us include:

  • A coating lifting around the plughole
  • A bath in a colour that no longer suits
  • Staining under the taps and around the waste
  • Chips and rust in more than one place

Comparing quotes

  • What happens if they find more damage
  • Whether the price covers travel
  • When it can be used again
  • Is the price fixed, and does it include VAT?

Our hiring checklist

Bath re-enamelling in Newtown, done in place

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for a period or roll-top bath worth keeping and a peeling or bubbling previous coating, in basins & shower trays, pressed steel baths and acrylic baths.

A one-year guarantee comes as standard.

Before and after: an old basin refinished to bright white
Where
Newtown (PO17)
Region
Hampshire
Warranty
12 months on all our work
Price
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

What a repair can’t fix

Before booking, it’s worth knowing the limits:

  • Acrylic that moves when you stand in it
  • A bath split right through the body
  • Leaks from fittings rather than the bath

Send us photos and we will tell you honestly.

What we work on

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Newtown and the surrounding area

Newtown is about 5 miles north-west of Waterlooville, in Hampshire. We travel to clients in Newtown, so there is no workshop to go to. Newtown is one of 683 places in Hampshire where we work. Our nearest city page is London, about 60 miles away.

Postcode districts we cover here: PO17. Jobs here include addresses on Church Road, Hundred Acres Road and Ingoldfield Lane. Neighbouring places we cover include Southend (1 mile north-east), Soberton Heath (1 mile north), Hoe Gate (1 mile east), Hipley (1 mile south-east) and Woodend (1 mile north-west). We also work in nearby towns such as Winchester (13 miles north-west), Gosport (8 miles south), Havant (7 miles south-east), Eastleigh (10 miles west), Fareham (5 miles south-west) and Horndean (5 miles east).

Landmarks near Newtown

We visit homes around Newtown Soberton Infant School, The Bold Forester Public House and Church of the Holy Trinity. The closest station to Newtown is Portchester station, roughly 4.4 miles south of the centre. A little further out are Knowle Hospital (3.8 miles south-west). For a walk, there is St Clair's Meadow and Portsdown Hill.

Map of Newtown © OpenStreetMap contributors

The process

Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow most of the day. Before we go, we’ll explain when it can be used and what to avoid for the first few days.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s typically ready the day after.

Getting ready for the visit

  • Clear the area around the damage
  • Let the surface dry out before the visit
  • Keep a parking space free if you can

How to get a price

Send us pictures of the damage and one of the entire item, and tell us you are in Newtown, and we’ll reply with a fixed quote.

Get a free quote

Related advice

Aftercare tips

Once the work has cured, treat it gently:

  • Keep suction mats out of the bath
  • Do not leave bottles, razors or sponges standing on the surface
  • Do not let dyes or oils sit on the finish
  • Use washing-up liquid and a soft cloth

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

Common questions in Newtown

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Do you cover the entire of Hampshire?

We cover the entire UK, including Newtown and the rest of Hampshire. Just include your postcode and we’ll confirm dates.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Does re-enamelling smell?

Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Landlords, agents and businesses in Newtown

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Repair or replace in Newtown?

A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why us?

  • We come to you, anywhere in the UK
  • A fixed quote before you book
  • Dust sheets down, tidy finish
  • Nothing taken out or refitted

Read our pricing or bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.