Shropshire · England
Bath re-enamelling & resurfacing in Norbury, Shropshire
We travel to Norbury for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
Bath re-enamelling in Norbury without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for a coloured bath you want in white and chips and rust in more than one place, in pressed steel baths, basins & shower trays and Victorian roll-tops.
Every repair is covered by a one-year guarantee.
- Location
- Norbury (SY13)
- Area hub
- Shropshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether we combine several jobs
- Unusual colours or finishes
- The type of damage
- How easy the damage is to reach
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Quotes from your photos
We price nearly every job from pictures. This is what we need:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- Any details about the material
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Fixed prices from your photos
- Repair technicians who travel to you, UK-wide
- Typically one visit, start to finish
- No need to remove anything
Read our full price list or bath cost comparison.
Our work in Norbury
Norbury is about 6 miles south-west of Nantwich, in Shropshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 433 places across Shropshire, from the larger towns to small villages. Our nearest city page is Liverpool, about 29 miles away.
Our visits in SY13 are booked in the same way as anywhere else. From School Lane and Norbury Town Lane or a nearby road, we can come to you. If you’re just outside Norbury, we cover Gauntons Bank (1 mile north-east), Holtridge (1 mile north), Swanwick Green (1 mile north-west), Norbury Common (1 mile north-west) and Marbury (1 mile south). We also work in nearby towns such as Market Drayton (11 miles south-east), Whitchurch (4 miles south), Wem (12 miles south), Ellesmere (13 miles south-west), Loggerheads (13 miles south-east) and Prees Higher Heath (7 miles south).
Around Norbury
Our customers here include homes close to St Michael's Church and Swan Inn, among other places. The closest station to Norbury is Wrenbury station, roughly 2.5 miles east. Further afield, we also cover the area around Marbury cum Quoisley (1.1 miles south) and Castle Hill motte (4.6 miles west).
Do you need bath re-enamelling in Norbury?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Look out for these signs:
- Several chips and rust patches
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
- An outdated colour you’d like to change
Questions to ask before you book
- How the room is protected while they work
- A fixed quote, and whether VAT is included
- Who will actually do the work
- Aftercare advice
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Nearby places to Norbury
More services for Norbury
How the visit works
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let us know about parking or access
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
Looking after it afterwards
To keep it looking its best for years:
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Landlord and trade work in Norbury
If you manage property in Norbury, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Common questions in Norbury
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What areas do you cover?
We work UK-wide, and that includes Norbury. Our prices are the same everywhere.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
About our accreditations · Every repair comes with a one-year guarantee.
