Gloucestershire · England
Bath re-enamelling & resurfacing in Norton, Gloucestershire
Our repair technicians come to Norton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Gloucestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Norton as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Bath re-enamelling in Norton without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on cast iron baths, Victorian roll-tops and basins & shower trays, and common reasons people get in touch are a peeling or bubbling previous coating and a period or roll-top bath worth keeping.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Norton (GL2)
- County
- Gloucestershire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day. The room is left tidy and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the next day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Advice
What we can’t put right
A repair isn’t right for every job, for example:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Never use suction bath mats
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why choose Surface Doctor in Norton
- Every repair guaranteed for a year
- Work done at your home or business
- Same prices wherever you are
- No need to remove anything
Read our prices page or bath cost comparison.
Norton and the surrounding area
Norton is about 5 miles north of Gloucester, in Gloucestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Norton is one of 470 towns and villages in Gloucestershire we cover. You can also see our page for Birmingham, about 41 miles away.
Our visits in GL2 work the same way as everywhere else we cover. Streets in the area include Lime Close, Wainlode Lane and Bramble Close, and we cover them all. Neighbouring places we cover include Bishop's Norton (1 mile north-west), Wallsworth (1 mile south-west), Sandhurst (2 miles south-west), Lower Apperley (2 miles north) and Apperley (3 miles north). Further out, we also cover Cheltenham (6 miles east), Gloucester (5 miles south), Stroud (12 miles south), Tewkesbury (6 miles north-east), St Paul's (6 miles east) and Lansdown (6 miles east).
Around Norton
We visit homes around Church of St Mary and Norton Church of England Primary School and the streets around them. For rail, the closest station is Gloucester station, about 3.7 miles south. Other landmarks nearby include Wotton Lawn Hospital (3.4 miles south) and Gloucester Castle (4 miles south-west). Green spaces nearby include Lassington Wood and Chosen Hill.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- Whether we combine several jobs
- What kind of damage it is
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
How to get a fixed price
You can normally get a fixed quote without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
- Something in shot to show the size
- Natural light rather than flash
The quickest way to a price is to send two or three photos using our quote form or ring us. We will say straight away if a repair is the right fix.
FAQs for Norton
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we will plan for it.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What else we do in Norton
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Common problems we fix in Norton
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Get in touch if you’ve noticed any of these:
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- Thin, worn enamel in places
What to look for in a quote
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
- What preparation is included
- What happens if the damage is worse than the photos show
About our accreditations · Every repair comes with a one-year guarantee.
