Sheffield · England

Bath re-enamelling & resurfacing in Norton, Sheffield

Full bath re-enamelling and resurfacing for homes and businesses in Norton and across Sheffield. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Norton

How we handle bath re-enamelling in Norton

The bath stays where it is, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. We’re often asked to fix a roll-top that’s seen better days and stains that won’t shift, across basins & shower trays, pressed steel baths and acrylic baths.

Every job is backed for twelve months in Norton and everywhere else. We return to put right any problem with the work.

Stained basin resurfaced to clean white (before and after)
Area
Norton (S8, S14)
Region
Sheffield
Warranty
One year on every repair
Quote
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

What affects the price in Norton

Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:

  • Where the damage is and how we get to it
  • Unusual colours or finishes
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.

Send photos for a quote

We price nearly every job from pictures. This is what we need:

  • Natural light rather than flash
  • What it’s made of, if you know
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size

Send us photos of the damage and a wider shot of the whole item, with your S8 postcode, and we will reply with a fixed quote.

The process

We begin by going over the job with you. Then the area is sheeted and masked and we start. It normally takes a full day.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Open a window if you can
  • Tell us if there are stairs or a lift

Ask for a price

The quickest way to a price is to send a couple of photos using our quote form or call us. We will tell you honestly whether it can be repaired.

Get a free quote

Read more

Your questions about bath re-enamelling in Norton

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can a failed resurfacing be redone?

Yes. Stripping the old coating adds time, so it’s reflected in the quote.

What information do you need?

Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Does the bath have to be removed?

No. We resurface it in place, so the tiles and taps stay put.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Can I get a quote without a visit?

In nearly every case. If photos don’t show enough, we’ll ask for another angle.

About Norton

Norton is about 2 miles south of Heeley, in Sheffield. Whether you’re in the middle of Norton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 118 places in Sheffield, from the larger towns to small villages. You can also see our page for Manchester, about 33 miles away.

Our technicians cover all of the S8 and S14 postcode area and the streets around it. Streets in the area include Norton Lane, School Lane and Haysden Lane, all of which we cover. We also cover the places around Norton: Lightwood (1 mile east), Meadowhead (1 mile west), Woodseats (1 mile north-west), Gleadless Valley (1 mile north-east) and Norton Lees (1 mile north). Within a short drive, we also cover Sheffield (3 miles north), Netherthorpe (4 miles north), Upperthorpe (4 miles north), West End (3 miles north), Walkley (4 miles north) and Broomhall (3 miles north).

What’s near Norton

In Norton, that means homes near Bagshawe Arms Public House, St James and Oakes Park and the streets around them. Also close by are Meadowhead School Academy Trust (0.8 miles south-west) and Norton Free Church of England Primary School (within half a mile north-east). The closest station to Norton is Dore & Totley station, roughly 2.3 miles west. A little further out are Sheffield Castle (3.4 miles north) and Nether Edge Hospital (2.4 miles north-west). Open spaces near Norton include Blacka Moor Nature Reserve.

  • Parks and local facilities nearby include Arbourthorne (1.9 miles north-east)
Map of Norton © OpenStreetMap contributors

Materials and what they mean for the repair

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Do you need bath re-enamelling in Norton?

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

The things clients typically mention when they call are:

  • Several chips and rust patches
  • A period or roll-top bath worth keeping
  • Brown or grey marks that do not clean off
  • Worn patches where water runs and sits

What to look for in a quote

  • How the colour is matched
  • How your room will be protected
  • Who will actually do the work
  • Is the price fixed, and does it include VAT?

How to compare quotes

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Have chips seen to early
  • Fix dripping taps quickly
  • Keep suction mats out of the bath
  • Don’t use the bath until it has fully cured

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.

Landlord and trade work in Norton

For anyone letting property in or around Norton, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

When we’d advise against a repair

We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:

  • A poorly supported acrylic bath, until it’s firmed up
  • Anything hidden under an old coating, until we remove it
  • A bath that’s rusted through

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Norton

  • Acrylic baths
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Victorian roll-tops
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.