Essex · England
Bath re-enamelling & resurfacing in Nounsley, Essex
Problem with your bath in Nounsley? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- Lots of chips and rust spots
Bath re-enamelling at your home in Nounsley
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We’re frequently asked to fix chips and rust in more than one place and a dull, rough surface that won’t come clean, in acrylic baths, pressed steel baths and cast iron baths.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Nounsley (CM3)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Nounsley
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- The material
- Access to the area
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- A close-up of the damage, in focus
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Towns and villages near Nounsley
Other services in Nounsley
How it works
We work cleanly and quietly. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
Getting a price
If you are in Nounsley and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Nounsley and the surrounding area
Nounsley is about 3 miles south-west of Witham, in Essex. Whether you are in the middle of Nounsley or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 644 towns and villages in Essex, from the larger towns to small villages. We work right across the region, from Nounsley to London (about 35 miles away).
Our repair technicians cover all of CM3 and the streets around it. Local streets include Priory Mews, Ulting Road and Priory Farm Road, and we cover them all. Close by, we cover Ulting (1 mile south), Woodham Walter (2 miles south), Langford (2 miles east), Curling Tye Green (2 miles south-east) and Wickham Bishops (3 miles east). We also work in nearby towns such as Colchester (15 miles north-east), Chelmsford (6 miles west), Basildon (15 miles south-west), Braintree (8 miles north), Maldon (4 miles south-east) and Billericay (12 miles south-west).
Around Nounsley
Our customers here include homes close to Hatfield Peverel Infant School, Parish Church of St Andrew and The Sportsmans Arms. The nearest railway station is Hatfield Peverel station, about 1.3 miles north-west. Well-known places in the area include Priory Hospital (5.3 miles west). Not far away are Danbury Ridge Nature Reserves.
How to care for the repair
Simple care helps the repair last. Our advice:
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Keep toiletries on a shelf rather than in the bath
- Don’t let dyes or oils sit on the finish
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Landlord and trade work in Nounsley
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What we cannot put right
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Nothing taken out or refitted
- Honest advice, even when it means no job
- One visit for most repairs
- A year’s guarantee on all work
Read our full price list and guide to resurfacing and replacement costs.
Common questions in Nounsley
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
How long does re-enamelling take?
One day for most baths, ready the next day. We’ll confirm timings when we quote.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Nounsley.
Do you cover Nounsley?
Yes. We cover the entire UK and travel to Nounsley. Send us photos for a fixed quote, or call 0345 017 0787.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your CM3 postcode.
About our accreditations · Every repair comes with a one-year guarantee.
