Oldham · England
Bath re-enamelling & resurfacing in Old Tame, Oldham
Local bath re-enamelling for Old Tame: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Bath re-enamelling at your home in Old Tame
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We regularly repair pressed steel baths, Victorian roll-tops and acrylic baths, and common reasons people get in touch are an original cast iron bath that needs restoring and an outdated colour you’d like to change.
Whatever the size of the job, it’s backed by a one-year guarantee in Old Tame and across Oldham.
- Location
- Old Tame (OL3)
- Region
- Oldham
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Old Tame
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Old Tame
- Honest advice, even when it means no job
- We leave the room as we found it
- Every repair guaranteed for a year
- Free fixed quotes from pictures
Read our pricing or resurfacing vs replacement cost guide.
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Where we work around Old Tame
Old Tame is about 2 miles east of Shaw, in Oldham. Wherever you are in the OL3 postcode area, a technician comes to you. Old Tame is one of 72 towns and villages in Oldham where we work. You can also see our page for Manchester, about 10 miles away.
Jobs in OL3 are booked in the same way as anywhere else. That includes homes on Oldham Road and Horest Lane and the roads around them. We also cover the places around Old Tame: Denshaw (1 mile north-east), Grains Bar (1 mile south-west), Heights (1 mile south-east), Linfitts (1 mile south-east) and Grange (1 mile east). Further out, we also cover Oldham (4 miles south-west), Chadderton (5 miles south-west), Royton (3 miles west), Failsworth (7 miles south-west), Coppice (5 miles south-west) and Waterhead (3 miles south-west).
Local landmarks in Old Tame
Typical jobs here are in homes near Crompton House, Christ Church and Printers Arms. Old Tame’s nearest station is Greenfield station, about 3.4 miles south-east of the centre. A little further out are Butterworth (2.8 miles north-west) and Ellenroad Ring Mill Engine (2.7 miles north-west). The countryside around Old Tame includes Standedge.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Aftercare tips
So the finish stays in good condition:
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Have chips seen to early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Questions from Old Tame
Which areas do you work in?
All of Oldham, and the rest of the UK. Travel is included in the price.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Can you fix a peeling bath coating?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any parking restrictions or tricky access
- Clear the area around the damage
- Keep a parking space free if you can
Getting a price
Send us pictures of the damage and a wider shot of the entire item, with your OL3 postcode, and we’ll come back with a fixed quote.
Read more
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- What the surface is made of
- How easy the damage is to reach
- How many areas need work
- Any earlier repairs that need removing first
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- Details of any past repairs
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
More services for Old Tame
Do you need bath re-enamelling in Old Tame?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Wear marks under the taps
Before booking anyone
- How long it needs to cure
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
