Lincolnshire · England
Bath Re-enamelling for Orby homes
Bath re-enamelling across Orby and nearby, usually in one visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Bath re-enamelling in Orby without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s brown or grey marks that don’t clean off and an old resurfacing that’s failing, we can help.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Area
- Orby (PE23, PE24)
- County
- Lincolnshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly.
What we work on
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Orby: your questions answered
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How do I get a price for bath re-enamelling in Orby?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
Places near Orby
More services for Orby
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Orby, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
Looking after it afterwards
It’s all simple stuff:
- Store bottles off the bath
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
- Have a window or extractor fan available
Getting a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How much damage there is
- Any earlier repairs that need removing first
- Access to the area
- The type of damage
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
Two or three clear photos are typically enough. Try to include:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Covering Orby
Orby is about 5 miles north-west of Skegness, in Lincolnshire. Across the PE23 area, we come to you. Orby is one of 732 places in Lincolnshire where we work.
Postcode districts we cover here: PE23 and PE24. That includes homes on Burgh Road and Welton Lane and the roads around them. We also cover the places around Orby: Burgh le Marsh (1 mile south), Bratoft (2 miles south-west), Irby in the Marsh (2 miles south-west), Croft (4 miles south) and Thorpe St Peter (4 miles south). Within a short drive, we also cover Skegness (5 miles south-east), Horncastle (14 miles west), Mablethorpe (11 miles north), Sutton on Sea (9 miles north), Spilsby (6 miles west) and Alford (6 miles north).
Local landmarks in Orby
Our customers here include homes close to Church of All Saints. The nearest railway station is Thorpe Culvert station, about 4.2 miles south. Nearby you’ll also find Alford and District War Memorial Cottage Hospital (6 miles north-west).
When to call us in Orby
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Signs it’s time to call us include:
- Wear marks under the taps
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- An outdated colour you’d like to change
Comparing quotes
- The length of the guarantee and what it covers
- Who will actually do the work
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
