Nottinghamshire · England
Bath re-enamelling & resurfacing in Osberton, Nottinghamshire
Bath re-enamelling in and around Osberton: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- Brown or grey marks that do not clean off
How we handle bath re-enamelling in Osberton
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for several chips and rust patches and a dull, rough surface that won’t come clean, across Victorian roll-tops, cast iron baths and basins & shower trays.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Osberton (S81)
- County
- Nottinghamshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Osberton
Osberton is about 3 miles east of Worksop, in Nottinghamshire. Across the S81 area, we come to you. We work in all 329 towns and villages in Nottinghamshire. Our jobs stretch from Osberton to Leeds (40 miles away).
Postcode districts we cover here: S81. Osberton sits on or near the B6079, so getting to you is simple. Other places close to Osberton include Ranby (2 miles east), Carlton Forest (2 miles north-west), Blyth (5 miles north), Torworth (5 miles north) and Ranskill (6 miles north). Within a short drive, we also cover Mansfield (13 miles south-west), Worksop (3 miles west), Sutton in Ashfield (15 miles south-west), Retford (5 miles east), Mansfield Woodhouse (11 miles south-west) and Forest Town (11 miles south-west).
Near you in Osberton
Typical jobs here are in homes near Church of St John. The nearest railway station is Worksop station, roughly 2.8 miles west. Other landmarks nearby include Worksop Castle (3 miles west) and Bassetlaw Hospital (2.3 miles west). Open spaces near Osberton include Sandhill Lake and Idle Valley Nature Reserve.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs immediately
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes most of the day. We clean up when we’re done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Tell us about parking, stairs or access
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Read more
Common questions in Osberton
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Do you come to Osberton?
Yes, we do. We send a technician to Osberton for every job, and the price is the same as everywhere else.
What areas do you cover?
The entire UK, including all of Nottinghamshire. Send your postcode with your pictures and we’ll offer you dates.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Osberton. The price reflects:
- Doing more than one item at once
- The type of damage
- Any earlier repairs that need removing first
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Places near Osberton
More services for Osberton
For landlords and businesses
For anyone letting property in or around Osberton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair will not do:
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Repairing versus replacing in Osberton
A replacement often means several trades over several days. Re-enamelling is one technician, usually one day. Prices start from £350. We charge the same wherever you are, with no extra for Osberton. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Osberton clients choose us
- Most jobs done in one visit
- Same prices wherever you are
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
Read our prices page or guide to resurfacing and replacement costs.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
