Nottinghamshire · England

Bath re-enamelling & resurfacing in Retford, Nottinghamshire

Our repair technicians come to Retford for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • Wear marks under the taps
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Retford

Bath re-enamelling in Retford without replacing anything

Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. Typical jobs include brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough, on pressed steel baths, cast iron baths and Victorian roll-tops.

Every repair is covered by a one-year guarantee.

Where
Retford (DN22)
Region
Nottinghamshire
Cover
A year, on every repair
Quotes
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

What we can’t put right

Honesty matters more than a booking, so here’s what a repair will not do:

  • Plumbing leaks, which need a plumber
  • A bath split right through the body
  • Anything hidden under an old coating, until we remove it

If in doubt, send pictures and we’ll say what we think before you book.

Surfaces we repair

  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops

Why repair rather than replace?

Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why Retford customers choose us

  • Fixed prices from your photos
  • Colour-matched on site
  • Same prices wherever you are
  • Everything repaired in place

Take a look at our pricing or resurfacing vs replacement cost guide.

Where we work around Retford

Retford is about 15 miles south-east of Doncaster, in Nottinghamshire. Across the DN22 area, we come to you. We work in 329 places across Nottinghamshire. We work right across the region, from Retford to Leeds (42 miles away).

All of DN22 is covered. Local streets include The Square, Station Road and London Road, and we cover them all. You will find Retford on the A620 and A638, which makes it straightforward to reach. We also travel to Ordsall (1 mile south), Bolham (1 mile north), Welham (2 miles east), Little Gringley (2 miles east) and Babworth (2 miles south-west). Within a short drive, we also cover Worksop (7 miles west), Mansfield Woodhouse (15 miles south-west), Forest Town (15 miles south-west), Shirebrook (14 miles south-west), Market Warsop (12 miles south-west) and New Ollerton (8 miles south). Retford is one of the larger places we cover in Nottinghamshire.

Landmarks near Retford

Typical jobs here are in homes near Ordsall Hall School, The Ship Inn and Retford Oaks Academy. Nearby too are St Michael the Archangel's Church (less than half a mile north-west) and St Swithun's Church of England Primary Academy (under half a mile east). The closest station to Retford is Retford station, about 0.5 miles south. A little further out are Rampton Secure Hospital (5 miles south-east) and Grove Castle Hill (2.3 miles east). The countryside around Retford includes Idle Valley Nature Reserve and Bellmoor Lake.

Map of Retford © OpenStreetMap contributors

What we do, step by step

You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It normally takes the best part of a day, and you are welcome to carry on with your day while we work.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Preparing for the visit

  • Ensure the area is dry
  • Point us to the nearest place to park
  • Keep pets and children out of the room while we work

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Send photos for a quote

Read more

For landlords and businesses

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

DIY kit or professional repair?

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

How to look after the repair

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • A quick wipe after use keeps limescale away
  • Leave the bath for the full curing time before using it
  • Repair dripping taps early
  • Wash away dyes and oils after use

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

Signs you need bath re-enamelling in Retford

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

People generally call us after spotting something like this:

  • Brown or grey marks that don’t clean off
  • An outdated colour you’d like to change
  • A period or roll-top bath worth keeping
  • Worn patches where water runs and sits

Comparing quotes

  • What preparation is included
  • When it can be used again
  • Whether a trained technician does the job
  • What the guarantee covers, and for how long

Choosing a repair company

FAQs for Retford

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.

What happens next?

You’ll get a fixed quote back, usually with dates to choose from. There’s no obligation to book.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.

Can you price it without visiting?

In nearly every case. If photos do not show enough, we’ll ask for another angle.

Will there be fumes?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before and we will plan for it.

Can pets and children be at home?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.