Kent · England
Bath Re-enamelling for Otham homes
Full bath re-enamelling and resurfacing at your home in Otham, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that’s failing
- Worn patches where water runs and sits
What a repair cannot fix
It helps to know what we can’t do:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Bath re-enamelling in Otham, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We’re frequently asked to fix lots of chips and rust spots and a bath in a colour that no longer suits, on acrylic baths, cast iron baths and basins & shower trays.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Otham (ME15, ME17)
- Region
- Kent
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. It normally takes the best part of a day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Have a window or extractor fan available
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
Get a quote
For a price in Otham, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Your questions about bath re-enamelling in Otham
How long is the bath unusable?
Usually one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Repair or replace in Otham?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with nothing added on the day.
Why choose Surface Doctor in Otham
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
- Same prices wherever you are
See our full price list or bath cost comparison.
When to call us in Otham
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- A roll-top that’s seen better days
What your quote should include
- Whether there are any call-out or travel charges
- When it can be used again
- Whether the colour is mixed to match
- Aftercare advice
Otham and the surrounding area
Otham is about 2 miles south-east of Maidstone, in Kent. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 922 towns and villages across Kent, from the larger towns to small villages. Our nearest city page is London, about 33 miles away.
Here we cover the ME15 and ME17 postcode area. Jobs here include addresses on Church Road, Spartall Drive and Ellis Field. Neighbouring places we cover include Willington (1 mile north-west), Park Wood (1 mile south-west), Langley (1 mile south-east), Shepway (1 mile north-west) and Caring (1 mile north-east). Further out, we also cover Ashford (15 miles south-east), Sittingbourne (10 miles north-east), Royal Tunbridge Wells (15 miles south-west), Gravesend (15 miles north-west), Tonbridge (13 miles west) and Faversham (15 miles east).
What’s near Otham
Around Otham, we work in homes near New Line Learning Academy, Mote Park and Senacre Wood Primary School, among other places. You’ll also find The White Horse pub (under half a mile east), Senacre Technology College (within half a mile south-west) and St Nicholas's Church (0.8 miles north). Otham’s nearest station is Bearsted station, about 2.1 miles north of the centre. Nearby you will also find Kent Fire Brigade Museum (2.4 miles west) and KIMS hospital (2.8 miles north). Green spaces nearby include Detling Hill.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
- Dry the bath after use to stop limescale
- Respect the curing time we give you
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- The type of damage
- Any earlier repairs that need removing first
- How many items we do on one visit
- The colour and finish to match
Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- Where you are, by postcode
- One sharp close-up of the damage
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Places near Otham
What else we do in Otham
For landlords and businesses
For anyone letting property in or around Otham, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
