Cheshire East · England
Bath Re-enamelling for Over Tabley homes
Full bath re-enamelling and resurfacing at your home in Over Tabley, with a one-year guarantee on every repair.
- Resurfacing from £350
- Lots of chips and rust spots
- A roll-top that is seen better days
Bath re-enamelling in Over Tabley without replacing anything
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, with the bath ready to use the following day. Our technicians work on basins & shower trays, Victorian roll-tops and pressed steel baths, and common reasons people contact us are a roll-top that’s seen better days and chips and rust in more than one place.
Every repair comes with a one-year guarantee, wherever you are in Cheshire East.
- Area
- Over Tabley (WA16)
- Region
- Cheshire East
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Respect the curing time we give you
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for a full day from start to finish. Before we go, we’ll explain when it can be used and how to care for it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Before we arrive
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Common questions in Over Tabley
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Cheshire East.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Honest limits
In fairness, some problems need a different fix:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Also near Over Tabley
What else we do in Over Tabley
Where we work around Over Tabley
Over Tabley is about 2 miles west of Knutsford, in Cheshire East. Jobs in Over Tabley are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Over Tabley is one of 254 places in Cheshire East we cover. You can also see our page for Manchester, about 14 miles away.
Postcode districts we cover here: WA16. Whether you live on Old Hall Lane, Chester Road and Holly Grove or a nearby road, we can come to you. Close by, we cover Feldy (2 miles west), Hoo Green (2 miles north), Bucklow Hill (2 miles north), Arley Green (2 miles west) and High Legh (3 miles north-west). We also work in nearby towns such as Crewe (15 miles south), Macclesfield (13 miles east), Congleton (14 miles south-east), Wilmslow (8 miles east), Middlewich (9 miles south) and Sandbach (12 miles south).
Near you in Over Tabley
Locally, our jobs take us to homes close to Knutsford Academy and St Paul's Church, among other places. For rail, the closest station is Knutsford station, about 2.2 miles south-east. Further afield, we also cover the area around Cuckooland Museum (1.3 miles south) and Knutsford War Memorial Cottage Hospital (2.2 miles east). Green spaces nearby include Neumann's Flash and Marbury Reedbed Nature Reserve.
Why repair rather than replace?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- Rooms protected and left tidy
- Honest advice, even when it means no job
- Most jobs done in one visit
- Technicians who travel to you, UK-wide
Take a look at our prices page and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Prices and what affects them
Resurfacing from £350. We price every job individually. What matters most is:
- Whether old repairs or coatings need taking off
- How much damage there is
- The type of damage
- The material and finish
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with no extras added later.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Natural light rather than flash
- A wider photo showing the whole bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
