Kent · England

Bath Re-enamelling in Palmer's Green

We travel to Palmer's Green for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • A dull, rough surface that will not come clean
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Palmer's Green

About our bath re-enamelling in Palmer's Green

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for wear marks under the taps and a roll-top that’s seen better days, in acrylic baths, cast iron baths and pressed steel baths.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Location
Palmer's Green (TN12)
County
Kent
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Repairing versus replacing in Palmer's Green

Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why book with us

  • One visit for most repairs
  • One-year guarantee on every repair
  • Honest advice, even when it means no job
  • Colour-matched on site

See our full price list and bath cost comparison.

What your bath is made of matters

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.

Common problems we fix in Palmer's Green

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Keep an eye out for these signs:

  • Thin, worn enamel in places
  • A coloured bath you want in white
  • A bath that stays dull however much you clean it
  • Staining under the taps and around the waste

Questions to ask before you book

  • Whether the price covers travel
  • The length of the guarantee and what it covers
  • Whether a trained technician does the job
  • Whether the colour is mixed to match

Choosing a repair company

Looking after it afterwards

How the surface is treated afterwards matters:

  • Keep suction mats out of the bath
  • Don’t use the bath until it has fully cured
  • Do not leave a chip unrepaired
  • Wash away dyes and oils after use

Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

When a repair is not the answer

It helps to know what we cannot do:

  • Holes rusted through the metal
  • A cast iron or steel bath that is cracked right through
  • Damage hidden under a previous coating, until it’s stripped back

If in doubt, send photos and we’ll say what we think.

Surfaces we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Our work in Palmer's Green

Palmer's Green is about 6 miles east of Royal Tunbridge Wells, in Kent. From the centre of Palmer's Green to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Palmer's Green is one of 922 places in Kent we cover. We work right across the region, from Palmer's Green to London (32 miles away).

We cover every part of TN12 and the streets around it. We also travel to Castle Hill (1 mile north-east), Pearson's Green (1 mile north-east), Horsmonden (1 mile south-east), Mile Oak (1 mile north) and Hazel Street (2 miles south). We also work in nearby towns such as Maidstone (9 miles north-east), Sevenoaks (13 miles north-west), Royal Tunbridge Wells (6 miles west), Tonbridge (7 miles north-west), Kings Hill (8 miles north) and Foley Park (10 miles north-east).

Near you in Palmer's Green

Locally, our jobs take us to homes close to Mascalls School, Halfway House Public House and Brenchley and Matfield Church of England Primary School and the streets around them. For rail, the closest station is Paddock Wood station, about 2.3 miles north. Other landmarks nearby include Old Scotney Castle (4.1 miles south) and The Hop Farm Museum (3.2 miles north). Open spaces near Palmer's Green include Tudeley Woods RSPB reserve.

Map of Palmer's Green © OpenStreetMap contributors

Palmer's Green: your questions answered

Will there be a smell?

Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Palmer's Green.

It’s been repaired before. Can you still fix it?

Yes, we often do. Removing the old work can add time, and that is in the quote.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Do you need to take the bath out?

No. We resurface it in place, so the tiles and taps stay put.

Can pets and children be at home?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Are there extra charges for Palmer's Green?

We do not add a call-out fee. Your fixed quote includes everything.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.

What bath re-enamelling costs

Prices start from £350. We price every job individually. The main factors are:

  • The colour and finish to match
  • What kind of damage it is
  • The material
  • Where the damage is and how we get to it

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Getting a price from pictures

Two or three clear photos are usually enough. Try to include:

  • A wider photo showing the entire bath
  • A coin or ruler next to the damage for scale
  • Daylight if possible, and no flash reflection
  • A close-up of the damage, in focus

To get a price, send a couple of pictures through our quote form or call us. We’ll say right away whether it can be repaired.

How it works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for the best part of a day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Tell us about parking, stairs or access
  • Keep children and pets away from the room on the day

Get a quote

If you are in Palmer's Green and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed price

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.