Devon · England
Bath re-enamelling & resurfacing in Parkham, Devon
Local bath re-enamelling for Parkham: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- An outdated colour you’d like to change
Parkham and nearby
Parkham is about 5 miles south-west of Bideford, in Devon. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Parkham is one of 586 places in Devon where we work.
Our repair technicians cover all of EX39. Whether you live on Rectory Lane, Barton Road and Stanley Court or anywhere nearby, a technician can come to you. We also cover the places around Parkham: Buckland Brewer (2 miles east), Fairy Cross (2 miles north-east), Ford (2 miles north-east), Monkleigh (4 miles east) and Frithelstock Stone (4 miles east). Further out, we also cover Barnstaple (13 miles north-east), Bideford (5 miles north-east), Braunton (11 miles north-east), Newport (13 miles north-east), Roundswell (11 miles north-east) and East-the-Water (5 miles north-east).
Landmarks near Parkham
Around Parkham, we work in homes near Church of St James, Parkham Primary School and Atlantic Academy and the streets around them. Other landmarks nearby include Bideford Community Hospital (5 miles north-east) and Kenwith Castle (4.7 miles north-east).
How we handle bath re-enamelling in Parkham
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Typical jobs include a bath that stays dull however much you clean it and thin, worn enamel in places, across pressed steel baths, Victorian roll-tops and cast iron baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Parkham (EX39)
- Region
- Devon
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
A repair is not right for every job, including:
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly before you book.
What we work on
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and we start. You can expect it to take most of the day, and we will tell you if anything changes.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
Getting a price
Email us a photo of the damage and a wider shot of the whole item, with your EX39 postcode, and we will come back with a fixed quote.
Read more
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- Repair dripping taps early
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Parkham clients choose us
- We will tell you if it’s not worth repairing
- Every repair guaranteed for a year
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list or bath cost comparison.
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Parkham. The price comes down to:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- How hard the colour is to match
- How easy the damage is to reach
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Getting a price from photos
We price nearly every job from photos. This is what we need:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Where you are, by postcode
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Parkham questions
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we’ll quote them together.
What happens after I send photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Do you resurface freestanding baths?
Yes. Inside and out.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Signs you need bath re-enamelling in Parkham
Frequently the bath has just had decades of use, and only the surface is worn. The body of the bath is typically perfectly sound.
Typical reasons for a call-out include:
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- Staining under the taps and around the waste
- An outdated colour you’d like to change
What your quote should include
- How long it needs to cure
- What aftercare is recommended
- Who turns up on the day
- What happens if the damage is worse than the pictures show
Nearby places to Parkham
More services for Parkham
About our accreditations · Every repair comes with a one-year guarantee.
