Essex · England
Bath Re-enamelling for Paslow Wood Common homes
Full bath re-enamelling and resurfacing for homes and businesses in Paslow Wood Common and across Essex. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that won’t shift

Bath re-enamelling in Paslow Wood Common without replacing anything
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We work on Victorian roll-tops, cast iron baths and basins & shower trays, and the jobs we see most are an old resurfacing that’s failing and a bath in a colour that no longer suits.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Paslow Wood Common (CM4, CM15)
- County
- Essex
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026

What we can’t put right
We will not take on work that will not last, so here’s what a repair can’t put right:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Where we work around Paslow Wood Common
Paslow Wood Common is about 5 miles north of Brentwood, in Essex. Our technicians come to clients in Paslow Wood Common and nearby villages, so there’s no workshop to go to. We cover 644 places across Essex. Our nearest city page is London, about 21 miles away.
Every address in CM4 and CM15 is covered, from the main roads to the quietest streets. Streets in the area include Nine Ashes Road and Ash Tree Grove, and we cover them all. Close by, we cover Stondon Massey (1 mile south), Hook End (1 mile south), Kelvedon Hatch (2 miles south-west), Marden Ash (2 miles west) and Doddinghurst Common (3 miles south). Within a short drive, we also cover Chelmsford (9 miles east), Basildon (11 miles south-east), Harlow (9 miles north-west), Brentwood (5 miles south), Billericay (7 miles south-east) and Rayleigh (15 miles south-east).
Around Paslow Wood Common
Typical jobs here are in homes near The Bull Inn, Blackmore Primary School and Church of St Peter and St Paul, among other places. The nearest railway station is Ingatestone station, about 4.2 miles south-east of the centre. Well-known places in the area include Willingale Doe (4 miles north) and Brentwood Community Hospital (4.9 miles south).
Nearby places to Paslow Wood Common
More services for Paslow Wood Common
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why us?
- No need to remove anything
- Free fixed quotes from pictures
- One price list for the entire UK
- We will tell you if it’s not worth repairing
See our pricing or guide to resurfacing and replacement costs.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Leave the bath for the full curing time before using it
- Don’t leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. It generally takes a full day, and you’re welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
- Let us know about parking or access
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Advice
Your questions about bath re-enamelling in Paslow Wood Common
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Common problems we fix in Paslow Wood Common
Many baths we resurface have simply been well used. The body of the bath is usually perfectly sound.
If you can see any of these, send us a picture:
- A coloured bath you want in white
- Stains that will not shift
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
Comparing quotes
- A fixed quote, and whether VAT is included
- What prep work is covered
- Whether the colour is mixed to match
- Who will actually do the work
About our accreditations · Every repair comes with a one-year guarantee.

