Wrexham · Wales
Bath re-enamelling & resurfacing in Pen-y-cae, Wrexham
Damaged bath in Pen-y-cae? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Keeping it looking good
Aftercare is simple:
- Respect the curing time we give you
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
How we handle bath re-enamelling in Pen-y-cae
The bath stays where it is, so the taps, tiles and plumbing are not touched. It usually takes one visit, with the bath ready to use the following day. Common call-outs are for a peeling or bubbling previous coating and lots of chips and rust spots, across Victorian roll-tops, cast iron baths and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Pen-y-cae (LL14)
- County
- Wrexham
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Pen-y-cae and the surrounding area
Pen-y-cae is about 5 miles south-west of Wrexham, in Wrexham. Whether you’re in the middle of Pen-y-cae or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Pen-y-cae is one of 115 towns and villages in Wrexham where we work. We work right across the region, from Pen-y-cae to Liverpool (about 29 miles away).
Postcode districts we cover here: LL14. That includes homes on Oakleigh, Trem-y-Berwyn and Trofryn and the roads around them. Nearby, we also work in Pant (1 mile north-east), Pentredŵr (1 mile north), Rhosllannerchrugog (1 mile north-east), Ponciau (1 mile north-east) and Johnstown (1 mile north-east). Larger places within reach include Wrexham (5 miles north-east), Caia Park (5 miles north-east), Offa (4 miles north-east), Rhosddu (5 miles north-east), Acton (5 miles north-east) and Little Acton (6 miles north-east).
Around Pen-y-cae
In Pen-y-cae, that means homes near Wheelwright Arms, Ysgol-Y-Grango and Penycae Community Primary School. Other local landmarks include Church of Saint John Evangelist (0.5 miles north-east) and The Land (1.5 miles south). The nearest railway station is Ruabon station, about 1.3 miles south-east of the centre. Nearby you will also find Cadwgan Castle (2.2 miles north) and Cefn Mawr and District Museum (2 miles south). Not far away are Copperas and Monks Pool.
Towns and villages near Pen-y-cae
More services for Pen-y-cae
Do you need bath re-enamelling in Pen-y-cae?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
If you can see any of these, send us a photo:
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Stains that won’t shift
- Several chips and rust patches
What to look for in a quote
- What preparation is included
- How long it needs to cure
- If travel is included in the price
- What happens if the damage is worse than the photos show
How we price bath re-enamelling
Prices start from £350. You will not pay by the hour. The price is based on:
- The material
- The colour and finish to match
- Doing more than one item at once
- Any earlier repairs that need removing first
Our prices are the same across the UK, so there’s no premium for Pen-y-cae. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Where you are, by postcode
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will say straight away whether it can be repaired.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Steel that has corroded right through
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Common questions in Pen-y-cae
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can you repair something that’s been repaired before?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which usually takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Related advice
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
If you manage property in Pen-y-cae, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- One visit for most repairs
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
Read our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
