Cornwall · England

Bath Re-enamelling in Pengersick

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Pengersick. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Pengersick?

FAQs for Pengersick

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders across Cornwall.

Does the bath have to be removed?

No. We resurface it in place, so nothing else is disturbed.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

What information do you need?

Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.

Is the work guaranteed?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Do you work in Pengersick?

Yes. We cover the entire UK and travel to Pengersick and the rest of Cornwall. Send us photos for a fixed quote, or call 0345 017 0787.

Bath re-enamelling in Pengersick without replacing anything

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s staining under the taps and around the waste and an original cast iron bath that needs restoring, we can usually put it right.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.

Before and after: an old basin refinished to bright white
Location
Pengersick (TR20)
County
Cornwall
Warranty
A year, on every repair
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

What your bath is made of matters

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Can I fix it myself?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Should you replace it?

Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Why book with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Every repair guaranteed for a year
  • Straight answers about what a repair can do
  • No extra charge for your area

Take a look at our pricing and bath cost comparison.

Landlords, agents and businesses in Pengersick

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

How it works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for the best part of a day. Before leaving, we tell you when it can be used and how to care for it.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s normally ready the following day.

Before we arrive

  • Keep children and pets away from the room on the day
  • Have a window or extractor fan available
  • Ensure the area is dry

Getting a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send photos for a quote

Advice

About Pengersick

Pengersick is about 5 miles west of Helston, in Cornwall. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We work in 644 places in Cornwall, from the larger towns to small villages.

Jobs in TR20 work the same way as everywhere else we cover. We also travel to Praa Sands (1 mile south-west), Germoe (1 mile north), Hendra (1 mile south-east), Newtown (1 mile north-west) and Rinsey Croft (1 mile east). Within a short drive, we also cover Falmouth (14 miles east), Camborne (8 miles north-east), Redruth (11 miles north-east), Penzance (7 miles west), Helston (5 miles east) and Hayle (6 miles north).

Around Pengersick

In Pengersick, that means homes near The Coach And Horses Public House, Germoe Community Primary School and Church of Saint Germoe, among other places. Nearby you will also find West Cornwall Musical Museum (2.7 miles north-west) and Acton Castle (1.9 miles west). The countryside around Pengersick includes The Loe and Marazion Marsh RSPB Reserve.

Map of Pengersick © OpenStreetMap contributors

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Damage hidden under a previous coating, until it’s stripped back
  • An acrylic bath that flexes badly underfoot
  • Plumbing leaks, which need a plumber

Send us photos and we’ll tell you honestly before you book.

What we work on

  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Keep suction mats out of the bath
  • Stick to gentle, non-abrasive cleaners
  • Don’t leave bottles, razors or sponges standing on the surface
  • Repair dripping taps early

Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Prices and what affects them

Prices start from £350. We charge the same across the UK, including Pengersick. The price reflects:

  • Access to the area
  • The type of damage
  • Whether old repairs or coatings need taking off
  • How many areas need work

A repair is priced on what needs doing, not your postcode. You will see the full price before you book.

How to get a fixed quote

When you take your pictures, these tips help us give you a firm price:

  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage
  • A picture taken from further back
  • Any earlier repairs or coatings

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.