Warrington · England
Bath re-enamelling & resurfacing in Penketh, Warrington
Damaged bath in Penketh? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Staining under the taps and around the waste
Bath re-enamelling at your home in Penketh
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. Common call-outs are for thin, worn enamel in places and a dull, rough surface that won’t come clean, on acrylic baths, basins & shower trays and Victorian roll-tops.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Penketh (WA5)
- County
- Warrington
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from photos. This is what makes a difference:
- The material
- Where the damage is and how we get to it
- How many items we do on one visit
- The type of damage
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Any earlier repairs or coatings
- Something in shot to show the size
- One picture of the whole bath
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Penketh and the surrounding area
Penketh is about 3 miles west of Warrington, in Warrington. We travel to clients in Penketh, so you don’t need to take anything anywhere. We cover 72 places across Warrington. Our nearest city page is Liverpool, about 11 miles away.
We cover every part of the WA5 postcode area and the streets around it. That includes homes on Ash Road, Oak Road and Well Lane and the roads around them. You’ll find Penketh on the A562, so it’s easy for us to reach. We also travel to Great Sankey (1 mile north-east), Sankey Bridges (1 mile east), Old Hall (2 miles north-east), Moss Side (2 miles south) and Whitecross (2 miles east). We also work in nearby towns such as Warrington (3 miles east), Golborne (7 miles north-east), Lymm (7 miles east), Fearnhead (4 miles north-east), Wilderspool (3 miles east) and Lowton (7 miles north-east).
What’s near Penketh
Typical jobs here are in homes near Penketh High School, St Joseph's Catholic Primary School and Vicarage Community Park. You’ll also find St Joseph's Church (within half a mile north-west) and Chapel House (less than half a mile north-east). There is a railway station in Penketh itself: Sankey for Penketh station. Further afield, we also cover the area around Warrington Hospital (1.9 miles east) and Museum of Policing in Cheshire (2.3 miles east). Open spaces near Penketh include Paddington Meadows.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Penketh questions
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Do you come to Penketh?
We do. Repair technicians travel to Penketh from across the region, with no extra charge for travel.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
Can you repair several things at once?
Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Keep toiletries on a shelf rather than in the bath
- Don’t leave a chip unrepaired
- Avoid suction-cup mats
- Do not let dyes or oils sit on the finish
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we’re done and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Keep a parking space free if you can
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
How to get a price
For a price in Penketh, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
Take a look at our prices page and resurfacing vs replacement cost guide.
When a repair is not the answer
It helps to know what we can’t do too:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Nearby places to Penketh
More services for Penketh
About our accreditations · Every repair comes with a one-year guarantee.
