South Gloucestershire · England
Bath Re-enamelling for Petty France homes
Fixed-price bath re-enamelling in Petty France and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- Staining under the taps and around the waste
Bath re-enamelling in Petty France, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include a bath in a colour that no longer suits and several chips and rust patches, in basins & shower trays, cast iron baths and Victorian roll-tops.
Older homes around Petty France may have baths that have been in place for decades. A sound older bath is well worth repairing.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Petty France (GL9)
- Area hub
- South Gloucestershire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Petty France. The price depends on:
- Whether we combine several jobs
- Access to the area
- What kind of damage it is
- The colour and finish to match
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
Most quotes are done from pictures alone. To help us price it:
- Something in shot to show the size
- A close-up of the damage, in focus
- The material, if you know it
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Landlord and trade work in Petty France
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
The process
Arrival times are agreed in advance. Once we’re there, the work takes the best part of a day. The room is left tidy and ready to use once it has cured. Somewhere like Petty France needs a little journey planning: let us know about lanes, gates and parking. Everything for the bath re-enamelling comes with us in one trip.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the following day.
How to prepare
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
Common questions in Petty France
Do you cover villages like Petty France?
Yes. We cover villages and hamlets as well as towns. Let us know about access and parking.
Is it worth repairing old baths in a period home in Petty France?
Usually: original pieces are frequently better made and harder to replace. Send photos and we will advise.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
How do I get a price for bath re-enamelling in Petty France?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
Do you work in Petty France?
Yes. We work across the UK and travel to Petty France and the rest of South Gloucestershire. Send us photos for a fixed quote, or call 0345 017 0787.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Baths in Petty France homes
Petty France is about 5 miles east of Yate, in South Gloucestershire. From the centre of Petty France to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 110 towns and villages across South Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 65 miles away.
Jobs in GL9 are booked in the same way as anywhere else. Neighbouring places we cover for bath re-enamelling include Dunkirk (1 mile north), Hawkesbury Upton (1 mile north-west), Horton (2 miles south-west), Totteroak (3 miles west) and Old Sodbury (3 miles south-west). Further out, we also cover Kingswood (11 miles south-west), Mangotsfield (9 miles south-west), Yate (5 miles west), Fishponds (11 miles south-west), Bradley Stoke (11 miles west) and Thornbury (9 miles west).
Landmarks near Petty France
Open spaces near Petty France include Nind Nature Reserve.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Petty France
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Towns and villages near Petty France
More services for Petty France
When to call us in Petty France
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
If you can see any of these, send us a picture:
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
For older houses around Petty France, near landmarks such as Church of St Michael and All Angels, an original cast iron or steel bath is worth keeping, and bath re-enamelling gives it years more use.
Questions to ask before you book
- When it can be used again
- Is the price fixed, and does it include VAT?
- How the colour is matched
- Whether there are any call-out or travel charges
Keeping it looking good
To keep it looking its best:
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Never use suction bath mats
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
