Nottinghamshire · England
Bath re-enamelling & resurfacing in Pinxton, Nottinghamshire
Local bath re-enamelling for Pinxton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- Enamel that is lost its shine and feels rough
When we would advise against a repair
Some jobs are not right for a repair, for example:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Bath re-enamelling at your home in Pinxton
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We are frequently asked to fix enamel that’s lost its shine and feels rough and an original cast iron bath that needs restoring, across basins & shower trays, Victorian roll-tops and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Pinxton (NG16)
- County
- Nottinghamshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Pinxton
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Doing more than one item at once
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- Any earlier repairs or coatings
- What it’s made of, if you know
- Where you are, by postcode
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and no obligation.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Honest advice, even when it means no job
- Same prices wherever you are
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
Take a look at our pricing and resurfacing vs replacement cost guide.
Common problems we fix in Pinxton
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Signs it’s time to call us include:
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
Questions to ask before you book
- What happens if they find more damage
- Whether there are any call-out or travel charges
- What preparation is included
- The length of the guarantee and what it covers
Questions from Pinxton
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Make sure the area is dry
- Point us to the nearest place to park
- Let us know about parking or access
How to get a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
Keeping it looking good
Nothing complicated is needed:
- Don’t leave a chip unrepaired
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- Repair dripping taps early
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Where we work around Pinxton
Pinxton is about 3 miles west of Kirkby-in-Ashfield, in Nottinghamshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Pinxton is one of 329 towns and villages in Nottinghamshire where we work. We work right across the region, from Pinxton to Manchester (about 46 miles away).
Every address in NG16 is covered, from the main roads to the quietest streets. Streets in the area include Church Street West, King Street and Lambcroft Road, all of which we cover. Neighbouring places we cover include Broadmeadows (1 mile north-west), Lower Birchwood (1 mile south-west), Upper Birchwood (1 mile south-west), Selston (2 miles south-east) and Pye Bridge (2 miles south-west). Within a short drive, we also cover Mansfield (6 miles north-east), Beeston (12 miles south), Carlton (13 miles south-east), Sutton in Ashfield (3 miles north-east), Hucknall (6 miles south-east) and West Bridgford (14 miles south-east).
Landmarks near Pinxton
Typical jobs here are in homes near Frederick Gent School, John King Infant Academy and Church of St Helen and the streets around them. For rail, the closest station is Alfreton station, roughly 2.1 miles west of the centre. A little further out are John King Workshop Museum (less than half a mile south-east) and Ashfield Community Hospital (3.1 miles east).
Places near Pinxton
What else we do in Pinxton
About our accreditations · Every repair comes with a one-year guarantee.
