Staffordshire · England
Bath Re-enamelling for Pipehill homes
Full bath re-enamelling and resurfacing for homes and businesses in Pipehill and across Staffordshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A roll-top that is seen better days
- A dull, rough surface that will not come clean
Common problems we fix in Pipehill
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
The things clients generally mention when they call include:
- A coloured bath you want in white
- Stains that will not shift
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Comparing quotes
- The length of the guarantee and what it covers
- How the colour is matched
- How the room is protected while they work
- Aftercare advice
Bath re-enamelling in Pipehill, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. We regularly repair basins & shower trays, cast iron baths and Victorian roll-tops, and people most often call us about an old resurfacing that’s failing and brown or grey marks that don’t clean off.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Pipehill (WS13)
- Region
- Staffordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Pipehill questions
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
What happens next?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
How do I get a price for bath re-enamelling in Pipehill?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up and a photo of the whole item with your WS13 postcode.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Towns and villages near Pipehill
What else we do in Pipehill
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Pipehill use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The size and number of damaged areas
- The material
- What kind of damage it is
- Where the damage is and how we get to it
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- A wider photo showing the whole bath
Upload photos of the damage and one of the entire item, with your WS13 postcode, and we’ll reply with a fixed price.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we’ll say what we think.
Materials we work on in Pipehill
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to the best part of a day, tidy-up included.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Keep children and pets away from the room on the day
- Tell us if there are stairs or a lift
- Ensure the area is dry
Get a quote
Most clients in Pipehill get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Repair or replace in Pipehill?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- One visit for most repairs
- Colour mixed on the day to match
- Honest advice, even when it means no job
- No need to remove anything
Read our prices page and bath cost comparison.
Covering Pipehill
Pipehill is about 2 miles south-west of Lichfield, in Staffordshire. Clients in Pipehill get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Pipehill is one of 512 towns and villages in Staffordshire where we work. Our jobs stretch from Pipehill to Birmingham (14 miles away).
Our technicians cover all of WS13 and the streets around it. Whether you live on Walsall Road, Lichfield Road and Fosseway Lane or a nearby road, we can come to you. Nearby, we also work in Edial (1 mile west), Woodhouses (1 mile north-west), Wall (1 mile south), Darwin Park (1 mile east) and Muckley Corner (1 mile south-west). Larger places within reach include Stafford (14 miles north-west), Burton upon Trent (13 miles north-east), Tamworth (8 miles east), Cannock (7 miles west), Rugeley (7 miles north-west) and Burntwood (3 miles west).
What’s near Pipehill
We visit homes around Beacon Park, Church of St John and The Friary School. Also close by are Christ Church CofE (C) Primary School (1 mile north-east) and Edial Hall School (0.8 miles west). Pipehill’s nearest station is Lichfield City station, roughly 1.7 miles east. Further afield, we also cover the area around Ogley Hay Rural (2.1 miles south-west) and Cannock Castle Ring (4.2 miles north-west). Open spaces near Pipehill include Minster Pool and George's Hayes.
About our accreditations · Every repair comes with a one-year guarantee.
