Fife · Scotland
Bath Re-enamelling for Pitscottie homes
Damaged bath in Pitscottie? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Brown or grey marks that do not clean off
About our bath re-enamelling in Pitscottie
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include a coating lifting around the plughole and enamel that’s lost its shine and feels rough, in basins & shower trays, acrylic baths and cast iron baths.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Pitscottie (KY15)
- Area hub
- Fife
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- A bath that’s rusted through
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Keeping it looking good
Simple care helps the repair last. Our advice:
- Have chips seen to early
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Places near Pitscottie
More services for Pitscottie
Your questions about bath re-enamelling in Pitscottie
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Pitscottie.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Pitscottie and nearby
Pitscottie is about 12 miles south of Dundee, in Fife. Whether you are in the middle of Pitscottie or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Pitscottie is one of 133 towns and villages in Fife where we work. We work right across the region, from Pitscottie to Edinburgh (27 miles away).
All of KY15 is covered, from the main roads to the quietest streets. Jobs here include addresses on Cupar Road, Ceres Road and Elie Road and the roads around them. We also cover the places around Pitscottie: Ceres (1 mile south-west), Dairsie (3 miles north), Craigrothie (3 miles south-west), Cupar (3 miles west) and Strathkinness (3 miles north-east). Further out, we also cover Kirkcaldy (15 miles south-west), Glenrothes (12 miles south-west), Leven (8 miles south), St Andrews (6 miles east), Dysart (14 miles south-west) and Methil (9 miles south).
Landmarks near Pitscottie
The closest station to Pitscottie is Cupar station, roughly 2.6 miles west of the centre. Nearby you’ll also find Craighall Castle (1.6 miles south) and Fife Folk Museum (1.5 miles south-west).
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Open a window if you can
- Point us to the nearest place to park
- Let us know which floor the room is on
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
Should you replace it?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- One price list for the entire UK
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
Take a look at our prices page and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What we’re called out for in Pitscottie
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
People normally call us when they notice one of these:
- Staining under the taps and around the waste
- Enamel that’s lost its shine and feels rough
- Wear marks under the taps
- A peeling or bubbling previous coating
What your quote should include
- What preparation is included
- How long the guarantee is and what it covers
- How long it needs to cure
- Whether the price is fixed and includes VAT
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- The material
- Whether it’s a chip, crack, burn or wear
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Details of any past repairs
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will say immediately whether it can be repaired.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
