Wrexham · Wales
Bath re-enamelling & resurfacing in Plas Madoc, Wrexham
Full bath re-enamelling and resurfacing for homes and businesses in Plas Madoc and across Wrexham. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Chips and rust in more than one place
- A roll-top that’s seen better days
Bath re-enamelling at your home in Plas Madoc
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Whether it’s chips and rust in more than one place and staining under the taps and around the waste, we can usually put it right, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Plas Madoc (LL14)
- County
- Wrexham
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Plas Madoc?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why book with us
- Dust sheets down, tidy finish
- Colour mixed on the day to match
- A year’s guarantee on all work
- Everything repaired in place
Read our pricing or resurfacing vs replacement cost guide.
Towns and villages near Plas Madoc
What else we do in Plas Madoc
Plas Madoc questions
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Keeping it looking good
How the surface is treated afterwards matters:
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
- Wash away dyes and oils after use
- Respect the curing time we give you
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
What we do, step by step
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Make sure the room can be ventilated
How to get a price
To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
Do you need bath re-enamelling in Plas Madoc?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
The things clients normally mention when they call are:
- Wear marks under the taps
- Brown or grey marks that do not clean off
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
Before you book anyone
- How changes to the job are handled
- How the colour is matched
- What protection goes down before work starts
- Aftercare advice
Our work in Plas Madoc
Plas Madoc is about 6 miles south-west of Wrexham, in Wrexham. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Our technicians cover all 115 towns and villages in Wrexham. You can also see our page for Liverpool, about 30 miles away.
We work across LL14. Whether you live on Peris, Woodward's Walk and Marlbrook or anywhere nearby, a technician can come to you. We also cover the places around Plas Madoc: Rhosymedre (1 mile south), Acrefair (1 mile west), Plas Bennion (1 mile north), Cefn-mawr (1 mile south-west) and Cefn-bychan (1 mile south-west). Further out, we also cover Wrexham (6 miles north-east), Caia Park (6 miles north-east), Offa (5 miles north-east), Rhosddu (6 miles north-east), Acton (6 miles north-east) and Little Acton (7 miles north-east).
Around Plas Madoc
Our customers here include homes close to Hampden Arms, Ysgol Rhiwabon and The Land. You will also find Rhosymedre Community Primary School (less than half a mile south) and Church of St John (within half a mile south-west). Plas Madoc’s nearest station is Ruabon station, about 0.9 miles east. Other landmarks nearby include Chirk Community Hospital (2.7 miles south) and Cefn Mawr and District Museum (0.8 miles south-west). Open spaces near Plas Madoc include Copperas and The Lake.
What affects the price in Plas Madoc
Prices start from £350. You will not pay by the hour. The price depends on:
- The material and finish
- The size and number of damaged areas
- How many items we do on one visit
- What kind of damage it is
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
When you take your pictures, a few simple things make all the difference:
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- What it’s made of, if you know
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
