Devon · England
Bath re-enamelling & resurfacing in Plymtree, Devon
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Plymtree. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
Bath re-enamelling at your home in Plymtree
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Whether it’s a coloured bath you want in white and wear marks under the taps, we can usually put it right, on acrylic baths, Victorian roll-tops and basins & shower trays alike.
Whatever the size of the job, you get the same one-year guarantee in Plymtree and across Devon.
- Where
- Plymtree (EX15)
- Region
- Devon
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Plymtree
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Plymtree. What changes the price is:
- What kind of damage it is
- Where the damage is and how we get to it
- The colour and finish to match
- How many areas need work
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Before you send pictures, these tips help us give you a firm price:
- The material, if you know it
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Nearby places to Plymtree
What else we do in Plymtree
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Landlord and trade work in Plymtree
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Plymtree and nearby
Plymtree is about 7 miles west of Honiton, in Devon. Our technicians come to homes and businesses in Plymtree, so nothing has to leave your home. Plymtree is one of 586 places in Devon we cover.
Postcode districts we cover here: EX15. Whether you live on Lear Park and Green End Lane or a nearby road, we can come to you. If you’re just outside Plymtree, we cover Norman's Green (1 mile north), Stoneyford (3 miles north-west), Kentisbeare (3 miles north), Cullompton (3 miles north-west) and Willand (5 miles north). Within a short drive, we also cover Exeter (10 miles south-west), Exmouth (13 miles south), Tiverton (9 miles north-west), Sidmouth (10 miles south-east), Honiton (7 miles east) and St Thomas (11 miles south-west).
Near you in Plymtree
Typical jobs here are in homes near Church of St John the Baptist, Plymtree Church of England Primary School and The Blacksmith's Arms. The nearest railway station is Feniton station, roughly 3.4 miles south-east. Nearby you will also find Bradninch Castle Hill (3.5 miles west).
Looking after it afterwards
So the finish stays in good condition for years:
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What we are called out for in Plymtree
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Look out for any of the following:
- Chips and rust in more than one place
- Worn patches where water runs and sits
- Stains that will not shift
- A roll-top that is seen better days
Comparing quotes
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
- When it can be used again
- What the guarantee covers, and for how long
Your questions about bath re-enamelling in Plymtree
Are there extra charges for Plymtree?
We do not add a call-out fee. The fixed price covers the visit and the work.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Can a failed resurfacing be redone?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Repair or replace in Plymtree?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- One price list for the entire UK
- Normally one visit, start to finish
- Colour-matched on site
- A fixed quote before you book
Read our pricing or guide to resurfacing and replacement costs.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
