Devon · England
Bath Re-enamelling for Willand homes
Full bath re-enamelling and resurfacing at your home in Willand, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that won’t shift
Bath re-enamelling at your home in Willand
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you are dealing with brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, we can normally put it right, on acrylic baths, Victorian roll-tops and cast iron baths alike.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Willand (EX15)
- County
- Devon
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Willand. The price depends on:
- The material and finish
- The type of damage
- The colour and finish to match
- Any earlier repairs that need removing first
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Quotes from your pictures
When you take your pictures, a few simple things make all the difference:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- Details of any past repairs
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say right away if a repair is the right fix.
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Clear the area around the damage
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
For landlords and businesses
We work for landlords, letting agents and housing providers in Willand as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Do you need bath re-enamelling in Willand?
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
- Wear marks under the taps
- An original cast iron bath that needs restoring
What to look for in a quote
- What preparation is included
- What protection goes down before work starts
- How the colour is matched
- Whether the price is fixed and includes VAT
Looking after it afterwards
Nothing complicated is needed:
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- Never use suction bath mats
- Fix dripping taps quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Also near Willand
Other services in Willand
Questions from Willand
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What happens after I send pictures?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How do I get a price for bath re-enamelling in Willand?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up and a picture of the entire item and your postcode.
What information do you need?
Use the quote form or ring 0345 017 0787.
About Willand
Willand is about 5 miles east of Tiverton, in Devon. We travel to customers in Willand and the surrounding area, so nothing has to leave your home. Our repair technicians cover all 586 towns and villages across Devon.
Postcode districts we cover here: EX15. Whether you live on Station Road, Gables Road and The Gables or anywhere nearby, we can come to you. Close by, we cover Stoneyford (2 miles south), Cullompton (2 miles south-west), Kentisbeare (3 miles south-east), Ashill (3 miles east) and Norman's Green (5 miles south). Larger places within reach include Exeter (13 miles south-west), Tiverton (5 miles west), Sidmouth (15 miles south-east), Honiton (10 miles south-east), St Thomas (14 miles south-west) and Larkbeare (14 miles south-west).
What’s near Willand
In Willand, that means homes near Parish Church of St Mary the Virgin, Uffculme School and Willand School and the streets around them. The closest station to Willand is Tiverton Parkway station, about 2 miles north. Further afield, we also cover the area around Bradninch Castle Hill (4.7 miles south-west) and Belmont Hospital (5 miles west).
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
