Worcestershire · England
Bath Re-enamelling in Podmoor
Full bath re-enamelling and resurfacing at your home in Podmoor, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- Stains that won’t shift
Bath re-enamelling in Podmoor without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a period or roll-top bath worth keeping and an outdated colour you’d like to change, on basins & shower trays, cast iron baths and pressed steel baths.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Podmoor (DY10)
- County
- Worcestershire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Podmoor and nearby
Podmoor is about 3 miles east of Stourport-on-Severn, in Worcestershire. Anywhere in DY10, we come to you. We cover all 376 towns and villages across Worcestershire. We work right across the region, from Podmoor to Birmingham (16 miles away).
Our repair technicians cover all of DY10. We also travel to Torton (1 mile west), Shenstone (1 mile north), Low Hill (1 mile north-west), Hartlebury (1 mile south-west) and Summerfield (1 mile north-west). Within a short drive, we also cover Worcester (10 miles south), Redditch (12 miles east), Kidderminster (3 miles north-west), Bromsgrove (6 miles east), Droitwich Spa (6 miles south) and Stourport-on-Severn (3 miles west).
Around Podmoor
In Podmoor, that means homes near The Plough pub. Podmoor’s nearest station is Hartlebury station, roughly 1 mile south-west of the centre. Well-known places in the area include Kidderminster Hospital (3.5 miles north-west) and Kidderminster Railway Museum (2.9 miles north-west). The countryside around Podmoor includes Wilden Marsh and Axborough Hill.
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for most of the day from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you are under no obligation.
Related advice
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Why Podmoor customers choose us
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Fixed prices from your pictures
- Straight answers about what a repair can do
See our pricing or resurfacing vs replacement cost guide.
Nearby places to Podmoor
Other services in Podmoor
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- What the surface is made of
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A close-up of the damage, in focus
- The material, if you know it
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Your questions about bath re-enamelling in Podmoor
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Are there extra charges for Podmoor?
No. Our quotes include travel, and we charge the same wherever you are.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
What areas do you cover?
All of Worcestershire, and the rest of the UK. Travel is included in the price.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
What happens next?
You will get a fixed quote back. There is no obligation to book.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Fix dripping taps quickly
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
What a repair can’t fix
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- Steel that has corroded right through
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Landlord and trade work in Podmoor
We work for landlords, letting agents and housing providers in Podmoor as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
