Gloucestershire · England
Bath Re-enamelling in Podsmead
Full bath re-enamelling and resurfacing in Podsmead, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Podsmead
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We work on Victorian roll-tops, pressed steel baths and cast iron baths, and people most often call us about stains that won’t shift and worn patches where water runs and sits.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Podsmead (GL1, GL4, GL2)
- Area hub
- Gloucestershire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Make sure the area is dry
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
Nearby places to Podsmead
What else we do in Podsmead
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- A dripping tap should be fixed promptly
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Don’t use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Common questions in Podsmead
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.
How do I get a price for bath re-enamelling in Podsmead?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why us?
- One price list for the entire UK
- Free fixed quotes from pictures
- We leave the room as we found it
- One visit for most repairs
Read our pricing and bath cost comparison.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Signs you need bath re-enamelling in Podsmead
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
People normally call us after spotting something like this:
- Chips and rust in more than one place
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
What to look for in a quote
- Aftercare advice
- How changes to the job are handled
- How the colour is matched
- What preparation is included
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Holes rusted through the metal
- Acrylic that moves when you stand in it
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Covering Podsmead
Podsmead is about 1 mile south-west of Gloucester, in Gloucestershire. Wherever you are in the GL1 postcode area, a technician comes to you. Podsmead is one of 470 towns and villages in Gloucestershire we cover. We work right across the region, from Podsmead to Birmingham (about 46 miles away).
Our repair technicians cover all of GL1, GL4 and GL2 and the streets around it. Jobs here include addresses on Epney Road, Bowly Road and Cole Avenue and the roads around them. Neighbouring places we cover include Tuffley (1 mile south), Moreland (1 mile north-east), Hempsted (1 mile north-west), Tredworth (1 mile north-east) and High Orchard (1 mile north). Within a short drive, we also cover Cheltenham (8 miles north-east), Stroud (7 miles south), Tewkesbury (11 miles north-east), St Paul's (9 miles north-east), Cirencester (15 miles south-east) and Lansdown (9 miles north-east).
Around Podsmead
In Podsmead, that means homes near Linden Tree pub, The Crypt School and Grange Primary School, among other places. Also close by are Gloucestershire College (1.3 miles north), St Barnabas Church (0.6 miles east) and Gloucester Library (1.5 miles north). For rail, the closest station is Gloucester station, about 1.8 miles north-east. Nearby you will also find Gloucester Waterways Museum (1.4 miles north) and Eastgate Shopping Centre (1.6 miles north). Not far away are Lassington Wood and Robinswood Hill.
About our accreditations · Every repair comes with a one-year guarantee.
