Lincolnshire · England
Bath Re-enamelling in Pointon
Full bath re-enamelling and resurfacing at your home in Pointon, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that is seen better days
- Several chips and rust patches
About our bath re-enamelling in Pointon
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Whether it’s a bath that stays dull however much you clean it and stains that won’t shift, we can generally put it right, on Victorian roll-tops, acrylic baths and cast iron baths alike.
Big or small, you get the same one-year guarantee.
- Where
- Pointon (NG34)
- County
- Lincolnshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Where the damage is and how we get to it
- The size and number of damaged areas
- Whether we combine several jobs
- What kind of damage it is
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- A photo taken from further back
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Work for landlords and builders
For anyone letting property in or around Pointon, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Nearby places to Pointon
More services for Pointon
When a repair is not the answer
In fairness, some problems need a different fix:
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
Send us photos and we will tell you honestly.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Questions from Pointon
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
What areas do you cover?
The entire UK, including all of Lincolnshire. Just include your postcode and we will confirm dates.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you cover Pointon?
We do. Repair technicians travel to Pointon from across the region, and the price is the same as everywhere else.
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for a full day. Before we go, we will explain how long to leave it and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Pointon and nearby
Pointon is about 8 miles north of Bourne, in Lincolnshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 732 towns and villages across Lincolnshire. We work right across the region, from Pointon to Birmingham (71 miles away).
Jobs in NG34 are booked in the same way as anywhere else. Streets in the area include High Street, St Gilberts Close and Millthorpe Road. We also cover the places around Pointon: Millthorpe (1 mile south), Sempringham (1 mile north), Billingborough (1 mile north), Dowsby (1 mile south) and Birthorpe (2 miles north-west). Further out, we also cover Boston (15 miles north-east), Grantham (13 miles west), Spalding (10 miles south-east), Sleaford (9 miles north), Bourne (8 miles south) and Austerby (8 miles south).
Landmarks near Pointon
Typical jobs here are in homes near Christchurch. Well-known places in the area include Aslackby Castle (2.1 miles west).
Looking after it afterwards
To keep it looking its best for years:
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Repair dripping taps early
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Why Pointon customers choose us
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- Usually one visit, start to finish
Read our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
