Lincolnshire · England
Bath Re-enamelling for Boston homes
We travel to Boston for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A coloured bath you want in white
- Worn patches where water runs and sits
How the visit works
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
About our bath re-enamelling in Boston
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include several chips and rust patches and an old resurfacing that’s failing, on pressed steel baths, cast iron baths and basins & shower trays.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Boston (PE21, PE20, PE22)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
About Boston
Boston is in Lincolnshire. Clients in Boston get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Boston is one of 732 places in Lincolnshire we cover.
Here we cover the PE21, PE20 and PE22 postcode area. Streets in the area include High Street, Pescod Square and Whiting Square. Boston is on the A16 and A17, so it’s easy for us to reach. Other places close to Boston include Staniland (1 mile south-west), St Thomas' (1 mile south), Witham (1 mile north-west), Skirbeck Quarter (1 mile south) and Skirbeck (1 mile south-east). Further out, we also cover Spalding (14 miles south-west), Holbeach (12 miles south), Woodhall Spa (15 miles north-west), Pinchbeck (13 miles south-west), Long Sutton (14 miles south-east) and Kirton (3 miles south). Being one of Lincolnshire’s larger places, Boston sees plenty of our work.
What’s near Boston
Around Boston, we work in homes near Witham Way Country Park, Boston Grammar School and The Golden Lion Public House, among other places. Also close by are Unitarian Church (under half a mile east), Kitwood Boys School (0.8 miles north) and Boston Pioneers Free School Academy (less than half a mile east). There is a railway station in Boston itself: Boston station. Other landmarks nearby include Frampton Castle (2.9 miles south) and Pilgrim Hospital (1.3 miles north-east). Green spaces nearby include RSPB Frampton Marsh.
Nearby places to Boston
What else we do in Boston
Aftercare tips
After the repair has cured, a few habits help it last:
- Leave the bath for the full curing time before using it
- Do not leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Common problems we fix in Boston
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Most people get in touch when they notice one of these:
- Worn patches where water runs and sits
- Stains that won’t shift
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
What to look for in a quote
- How to look after the finish
- What protection goes down before work starts
- How soon you can use it again
- Whether the colour is mixed to match
Questions from Boston
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so let us know about it.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- Repair technicians who travel to you, UK-wide
- Everything repaired in place
- Fixed prices from your pictures
- Same prices wherever you are
Read our full price list and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Boston
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
What a repair can’t fix
A repair isn’t right for every job, including:
- Plumbing leaks, which need a plumber
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Boston
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
