Devon · England

Bath re-enamelling & resurfacing in Pool, Devon

Bath re-enamelling in and around Pool: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Pool

Aftercare tips

So the finish stays in good condition for years:

  • Wash away dyes and oils after use
  • Dry the bath after use to stop limescale
  • Keep toiletries on a shelf rather than in the bath
  • Do not leave a chip unrepaired

A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Bath re-enamelling in Pool without replacing anything

Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Our technicians work on basins & shower trays, cast iron baths and pressed steel baths, and common reasons people contact us are wear marks under the taps and brown or grey marks that don’t clean off.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Pool (EX20)
County
Devon
Cover
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Pool and nearby

Pool is about 10 miles north of Tavistock, in Devon. Jobs in Pool are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Pool is one of 586 places in Devon we cover.

Our visits in EX20 work the same way as everywhere else we cover. We also cover the places around Pool: Bridestowe (1 mile south-west), Sourton (1 mile east), Thorndon Cross (3 miles north), Lydford (3 miles south) and Bratton Clovelly (4 miles west). Larger places within reach include Tavistock (10 miles south), Okehampton (6 miles north-east), Holsworthy (14 miles north-west), Tiddy Brook Meadows (11 miles south), Bere Alston (15 miles south) and Hatherleigh (9 miles north).

Near you in Pool

Typical jobs here are in homes near White Hart Inn, Bridestowe Primary School and Church of St Bridget. A little further out are Okehampton Community Hospital (5.6 miles north-east) and Lydford Castle (3.3 miles south). The countryside around Pool includes Great Links Tor.

Map of Pool © OpenStreetMap contributors

The process

We agree an arrival time beforehand. Once we’re there, the work takes the best part of a day for most jobs. The room is left tidy and you will know when it can be used.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Tell us about any previous repairs or coatings
  • Avoid using the area for a few hours before we arrive

Get a quote

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Send pictures for a quote

Related advice

What bath re-enamelling costs

Resurfacing from £350. You’ll know the full cost before you book. We take into account:

  • Doing more than one item at once
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out
  • The size and number of damaged areas

A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.

How to get a fixed quote

We price nearly every job from photos. This is what we need:

  • Good light, ideally daylight, without flash glare
  • The postcode, so we can plan the visit
  • A photo taken from further back
  • A coin beside the damage so we can judge size

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.

Questions from Pool

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is repairing better than replacing?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

What happens if you find more damage?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.

How long does re-enamelling last?

Look after it and it lasts. Avoid abrasive cleaners and suction mats.

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.

Can you resurface a pink bath in white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside if you’d like.

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Leaks from fittings rather than the bath
  • Acrylic that moves when you stand in it
  • A bath split right through the body

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Pool

  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops

Repairing versus replacing in Pool

If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

What you get with us

  • Nothing taken out or refitted
  • Fixed prices from your photos
  • Every repair guaranteed for a year
  • We’ll tell you if it’s not worth repairing

Take a look at our prices page and guide to resurfacing and replacement costs.

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Landlords, agents and businesses in Pool

For anyone letting property in or around Pool, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.

Landlords, letting agents and housing providers in Pool use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.