Suffolk · England
Bath re-enamelling & resurfacing in Pulham Market, Suffolk
Bath re-enamelling for Pulham Market, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A roll-top that is seen better days
- A coating lifting around the plughole
Bath re-enamelling at your home in Pulham Market
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Our technicians work on pressed steel baths, acrylic baths and basins & shower trays, and the jobs we see most are wear marks under the taps and staining under the taps and around the waste.
We stand behind the work with a one-year guarantee.
- Location
- Pulham Market (IP21)
- Area hub
- Suffolk
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Pulham Market
Landlords, letting agents and housing providers in Pulham Market use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
About Pulham Market
Pulham Market is about 11 miles south-east of Wymondham, in Suffolk. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our technicians cover 731 places across Suffolk, from the larger towns to small villages.
Postcode districts we cover here: IP21. That includes homes on Station Road, Selwyn Court and Tattlepot Road and the roads around them. We also travel to Colegate End (1 mile north), Pulham St Mary (1 mile south-east), Bush Green (1 mile north-east), Starston (3 miles south-east) and Hardwick (3 miles north-east). Within a short drive, we also cover Beccles (14 miles east), Diss (6 miles south-west), Bungay (9 miles east), Halesworth (13 miles south-east), Framlingham (15 miles south) and Worlingham (15 miles east).
What’s near Pulham Market
Around Pulham Market, we work in homes near Pulham Church of England Primary School, Church of St Mary Magdalene and Falcon Inn and the streets around them. Nearby you’ll also find Harleston Museum (3.7 miles south-east) and Hawkers Hall (3.7 miles east).
What a repair can’t fix
In fairness, some problems need a different fix:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Pulham Market
- We will tell you if it’s not worth repairing
- Everything repaired in place
- One price list for the entire UK
- Every repair guaranteed for a year
See our pricing and bath cost comparison.
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- The material and finish
- Access to the area
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, so there is no premium for Pulham Market. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
- The material, if you know it
- Your postcode, so we can check dates
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
When to call us in Pulham Market
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
Look out for any of the following:
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
Questions to ask before booking
- Aftercare advice
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
Also near Pulham Market
More services for Pulham Market
Questions from Pulham Market
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
What happens after I send pictures?
We come back with a fixed quote, plus dates. You are under no obligation.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do the materials smell?
There may be a mild smell during the work.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How much does bath re-enamelling cost in Pulham Market?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Get a quote
Most clients in Pulham Market get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
