Suffolk · England
Bath Re-enamelling in Pulham St Mary
Problem with your bath in Pulham St Mary? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Stains that won’t shift
- Several chips and rust patches
Covering Pulham St Mary
Pulham St Mary is about 12 miles south-east of Wymondham, in Suffolk. Anywhere in IP21, a technician comes to you. We cover 731 places across Suffolk, from the larger towns to small villages.
Every address in IP21 is covered. Whether you live on The Street, Station Road and Poppy's Lane or anywhere nearby, we can come to you. If you’re just outside Pulham St Mary, we cover Pulham Market (1 mile north-west), Bush Green (1 mile north), Colegate End (2 miles north-west), Starston (2 miles south-east) and Hardwick (3 miles north). Larger places within reach include Beccles (14 miles east), Diss (6 miles south-west), Bungay (9 miles east), Halesworth (12 miles south-east), Framlingham (14 miles south) and Worlingham (15 miles east).
What’s near Pulham St Mary
Typical jobs here are in homes near Pulham Church of England Primary School, The King's Head Public House and Church of St Mary and the streets around them. Other landmarks nearby include Hawkers Hall (2.8 miles east) and Harleston Museum (2.8 miles south-east).
Bath re-enamelling in Pulham St Mary, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the following day. Typical jobs include a bath that stays dull however much you clean it and staining under the taps and around the waste, across acrylic baths, cast iron baths and basins & shower trays.
We stand behind the work with a one-year guarantee.
- Location
- Pulham St Mary (IP21)
- County
- Suffolk
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
How it works
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day, tidy-up included.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Clear the area around the damage
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
Ask for a price
Email us a picture of the damage and one of the whole item, and tell us you’re in Pulham St Mary, and we’ll come back with a fixed quote.
Advice
How we price bath re-enamelling
Prices start from £350. You’ll know the full cost before you book. We look at:
- Access to the area
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- The material and finish
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Quotes from your pictures
When you take your photos, a few simple things make all the difference:
- Natural light rather than flash
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
For a price in Pulham St Mary, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Do you need bath re-enamelling in Pulham St Mary?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Brown or grey marks that don’t clean off
- An old resurfacing that is failing
Comparing quotes
- Whether the price is fixed and includes VAT
- How the colour is matched
- How the room is protected while they work
- Who turns up on the day
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Repair or replace in Pulham St Mary?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Pulham St Mary clients choose us
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
- A fixed quote before you book
Read our pricing or bath cost comparison.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs in Suffolk and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Common questions in Pulham St Mary
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Which areas do you work in?
We work UK-wide, and that includes Pulham St Mary. Our prices are the same everywhere.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Can a failed resurfacing be redone?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do you come to Pulham St Mary?
Yes. We cover the entire UK and travel to Pulham St Mary and the rest of Suffolk. Send us pictures for a fixed quote, or call 0345 017 0787.
Towns and villages near Pulham St Mary
Other services in Pulham St Mary
About our accreditations · Every repair comes with a one-year guarantee.
