Isle of Wight · England
Bath re-enamelling & resurfacing in Pyle, Isle of Wight
Bath re-enamelling in and around Pyle: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Pyle without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Our technicians work on acrylic baths, basins & shower trays and Victorian roll-tops, and people most often call us about brown or grey marks that don’t clean off and chips and rust in more than one place.
All our work comes with a one-year guarantee, wherever you are in Isle of Wight.
- Location
- Pyle (PO38)
- County
- Isle of Wight
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Pyle
If you manage property in Pyle, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What happens on the day
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a full day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Have a window or extractor fan available
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Read more
Where we work around Pyle
Pyle is about 6 miles south of Newport, in Isle of Wight. Clients in Pyle get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Pyle is one of 125 towns and villages in Isle of Wight we cover.
Every address in PO38 is covered. We regularly work on streets such as Pyle Shute, Westside Lane and Atherfield Road. Other places close to Pyle include Chale Green (1 mile north-east), Atherfield Green (1 mile north-west), Little Atherfield (1 mile north-west), Shorwell (3 miles north-west) and Thorncross (3 miles north-west). Within a short drive, we also cover Newport (6 miles north), Ryde (11 miles north-east), Cowes (10 miles north), Sandown (8 miles north-east), Shanklin (7 miles east) and Ventnor (5 miles east). Some remote addresses need extra planning, so call us to arrange it.
Around Pyle
In Pyle, that means homes near St Andrew's Church and the streets around them. A little further out are Blackgang Sawmill Museum (1.4 miles south-east) and Whitecroft Hospital (4.5 miles north). Not far away are Stenbury Down.
Other services in Pyle
What we cannot put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before you book.
What we work on
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Pyle customers choose us
- We leave the room as we found it
- CHAS and Constructionline accredited
- Colour-matched on site
- Every repair guaranteed for a year
See our pricing and resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Pyle?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Most people contact us when they notice something like this:
- Chips and rust in more than one place
- Thin, worn enamel in places
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
What your quote should include
- Aftercare advice
- Whether the price is fixed and includes VAT
- How long it needs to cure
- If travel is included in the price
Prices and what affects them
Prices start from £350. We price every job individually. The main factors are:
- Access to the area
- Doing more than one item at once
- What kind of damage it is
- The colour and finish to match
We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
You can take the pictures on your phone. Just ensure we can see:
- Details of any past repairs
- One sharp close-up of the damage
- A photo taken from further back
- Natural light rather than flash
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Pyle questions
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Are there extra charges for Pyle?
No. Our quotes include travel, and we charge the same wherever you are.
How do I book?
Use the quote form or ring 0345 017 0787.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Aftercare tips
After the repair has cured, a few habits help it last:
- Don’t use the bath until it has fully cured
- Wash away dyes and oils after use
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
