Somerset · England
Bath Re-enamelling in Pylle
Problem with your bath in Pylle? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
How we handle bath re-enamelling in Pylle
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for worn patches where water runs and sits and a coating lifting around the plughole, across acrylic baths, basins & shower trays and cast iron baths.
Big or small, you get the same one-year guarantee in Pylle and across Somerset.
- Area
- Pylle (BA4)
- County
- Somerset
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Pylle
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- How hard the colour is to match
- Where the damage is and how we get to it
- What the surface is made of
- Whether we combine several jobs
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- One picture of the whole bath
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface without moving it. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- CHAS and Constructionline accredited
- One price list for the entire UK
- Straight answers about what a repair can do
- Rooms protected and left tidy
Read our pricing and bath cost comparison.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
About Pylle
Pylle is about 6 miles south-east of Wells, in Somerset. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Pylle is one of 640 places in Somerset where we work.
All of BA4 is within our area. Local streets include Pylle Lane and Pylle Hill. We also travel to Wraxall (1 mile south), Huxham Green (1 mile south-west), Ditcheat (2 miles south-east), Pilton (2 miles north-west) and East Compton (2 miles north). Within a short drive, we also cover Yeovil (14 miles south), Frome (12 miles north-east), Wells (6 miles north-west), Midsomer Norton (10 miles north), Shepton Mallet (3 miles north) and Street (8 miles west).
Local landmarks in Pylle
Our customers here include homes close to Church of St Thomas à Becket, among other places. Pylle’s nearest station is Castle Cary station, about 3.4 miles south-east of the centre. Further afield, we also cover the area around Mendip Hospital (5.5 miles north-west). Open spaces near Pylle include Lamyatt Beacon.
What we are called out for in Pylle
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, usually first under the taps and around the waste.
If you can see any of these, send us a photo:
- A roll-top that is seen better days
- An outdated colour you’d like to change
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
Comparing quotes
- Is the price fixed, and does it include VAT?
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
- Aftercare advice
When a repair isn’t the answer
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Pylle
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
How it works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for the best part of a day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Ensure the area is dry
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Read more
Pylle questions
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens next?
You’ll get a fixed quote back, typically with dates to choose from. You’re under no obligation.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Can a failed resurfacing be redone?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs immediately
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Towns and villages near Pylle
More services for Pylle
About our accreditations · Every repair comes with a one-year guarantee.
