Nottinghamshire · England
Bath Re-enamelling for Ragnall homes
Full bath re-enamelling and resurfacing at your home in Ragnall, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
How to look after the repair
So the finish stays in good condition for years:
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our bath re-enamelling in Ragnall
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We’re often asked to fix stains that won’t shift and several chips and rust patches, in acrylic baths, cast iron baths and basins & shower trays.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Ragnall (NG22)
- Area hub
- Nottinghamshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Ragnall
More services for Ragnall
Covering Ragnall
Ragnall is about 8 miles south-east of Retford, in Nottinghamshire. We visit homes and businesses in Ragnall, so there’s no workshop to go to. Our repair technicians cover 329 places in Nottinghamshire. Our jobs stretch from Ragnall to Leeds (49 miles away).
Here we cover the NG22 postcode area. We also travel to Darlton (2 miles west), East Drayton (2 miles north-west), Stokeham (2 miles north-west), Skegby (2 miles south-west) and Normanton on Trent (3 miles south). We also work in nearby towns such as Worksop (14 miles west), Newark-on-Trent (12 miles south), Retford (8 miles north-west), Market Warsop (15 miles west), Balderton (14 miles south) and Southwell (14 miles south-west).
Landmarks near Ragnall
Typical jobs here are in homes near White Swan pub, Church of St Leonard and Dunham-on-Trent CofE Primary School and the streets around them. Further afield, we also cover the area around Rampton Secure Hospital (3 miles north-west).
FAQs for Ragnall
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
How the visit works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
- Open a window if you can
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- The material and finish
- What kind of damage it is
The price reflects the work involved, not where you live. You will see the full price before booking.
Quotes from your photos
We price nearly every job from pictures. This is what we need:
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Any details about the material
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Landlord and trade work in Ragnall
We work for landlords, letting agents and housing providers in Ragnall as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
When we would advise against a repair
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Repair or replace in Ragnall?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- One visit for most repairs
- Colour mixed on the day to match
- One price list for the entire UK
- Straight answers about what a repair can do
Take a look at our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
