Surrey · England
Bath Re-enamelling for Ranmore Common homes
Bath re-enamelling for Ranmore Common, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Stains that won’t shift
- A peeling or bubbling previous coating
What we do, step by step
We agree an arrival time beforehand. Once we are there, the work takes most of the day for most jobs. The room is left tidy and ready to use once it has cured.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
Bath re-enamelling in Ranmore Common, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people contact us are a coloured bath you want in white and an old resurfacing that’s failing.
All our work comes with our one-year guarantee.
- Area
- Ranmore Common (RH5)
- Region
- Surrey
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Also near Ranmore Common
More services for Ranmore Common
Ranmore Common questions
Are there extra charges for Ranmore Common?
We don’t add a call-out fee. Your fixed quote includes everything.
What happens next?
We review the photos and send a fixed quote with dates.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Covering Ranmore Common
Ranmore Common is about 2 miles north-west of Dorking, in Surrey. Whether you’re in the middle of Ranmore Common or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 395 towns and villages in Surrey, from the larger towns to small villages. Our nearest city page is London, about 21 miles away.
We work across the RH5 postcode area and the streets around it. Close by, we cover Westcott (1 mile south), Westhumble (2 miles north-east), Dorking (2 miles south-east), Pixham (2 miles east) and Wotton (2 miles south-west). We also work in nearby towns such as Guildford (9 miles west), Woking (10 miles north-west), Epsom (8 miles north-east), Horley (10 miles south-east), Redhill (8 miles east) and Ewell (9 miles north-east).
Landmarks near Ranmore Common
Typical jobs here are in homes near Church of St Barnabas, Pippbrook House and Milton Heath and The Nower, among other places. Nearby too are The Priory CofE Voluntary Aided School (1.4 miles south-east) and Surrey Hills All Saints Primary School (1.1 miles south). Ranmore Common’s nearest station is Dorking West station, about 1.1 miles east. Nearby you’ll also find Betchworth Castle (3 miles east) and Mesolithic Museum (3.3 miles south-west). Not far away are Box Hill and Combe Bottom.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs immediately
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
What affects the price in Ranmore Common
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Where the damage is and how we get to it
- The material
- How much damage there is
- What kind of damage it is
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- The material, if you know it
- One picture of the whole bath
- A clear, close picture of the problem area
- Your postcode, so we can check dates
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Repairing versus replacing in Ranmore Common
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
Why book with us
- Fixed prices from your pictures
- We will tell you if it’s not worth repairing
- We leave the room as we found it
- CHAS and Constructionline accredited
Take a look at our full price list or guide to resurfacing and replacement costs.
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
