Surrey · England
Bath re-enamelling & resurfacing in Westcott, Surrey
Full bath re-enamelling and resurfacing at your home in Westcott, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
Bath re-enamelling in Westcott without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair basins & shower trays, pressed steel baths and cast iron baths, and common reasons people contact us are a bath that stays dull however much you clean it and a peeling or bubbling previous coating.
Every repair comes with a one-year guarantee, wherever you are in Surrey.
- Area
- Westcott (RH4)
- County
- Surrey
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- Where the damage is and how we get to it
- The type of damage
- The size and number of damaged areas
- Doing more than one item at once
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
If you’re in Westcott and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Westcott. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- A year’s guarantee on all work
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
Take a look at our prices page and resurfacing vs replacement cost guide.
Keeping it looking good
To keep it looking its best:
- Don’t leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Don’t leave a chip unrepaired
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Your questions about bath re-enamelling in Westcott
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
How it works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes most of the day for most jobs. The room is left tidy and you will know when it can be used.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
What we’re called out for in Westcott
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
Look out for any of the following:
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
- Stains that will not shift
- A roll-top that’s seen better days
What to look for in a quote
- When it can be used again
- How your room will be protected
- How changes to the job are handled
- How to look after the finish
Westcott and nearby
Westcott is about 2 miles west of Dorking, in Surrey. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 395 towns and villages in Surrey, from the larger towns to small villages. You can also see our page for London, about 22 miles away.
All of RH4 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Guildford Road, Chapel Lane and Stones Lane. Neighbouring places we cover include Ranmore Common (1 mile north), Wotton (1 mile south-west), Dorking (2 miles east), North Holmwood (2 miles south-east) and Mid Holmwood (2 miles south-east). Within a short drive, we also cover Guildford (9 miles west), Woking (11 miles north-west), Epsom (9 miles north-east), Horley (9 miles east), Redhill (9 miles east) and Ewell (10 miles north-east).
What’s near Westcott
Locally, our jobs take us to homes close to Surrey Hills All Saints Primary School, St John's Community Hall and Milton Heath and The Nower and the streets around them. Nearby too are The Priory CofE Voluntary Aided School (1.1 miles east), Pippbrook House (1.9 miles north-east) and The Prince of Wales pub (within half a mile east). The closest station to Westcott is Dorking West station, about 1.4 miles north-east. Well-known places in the area include Headley Court (6 miles north-east) and Mesolithic Museum (2.4 miles south-west). For a walk, there is Combe Bottom and Box Hill.
Towns and villages near Westcott
Also in Westcott
About our accreditations · Every repair comes with a one-year guarantee.
