Isle of Wight · England
Bath re-enamelling & resurfacing in Rew Street, Isle of Wight
Bath re-enamelling for Rew Street, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
How we handle bath re-enamelling in Rew Street
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our repair technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people contact us are a peeling or bubbling previous coating and stains that won’t shift.
Every repair comes with our one-year guarantee, wherever you are in Isle of Wight.
- Location
- Rew Street (PO31)
- Region
- Isle of Wight
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Rew Street
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
People generally call us when they notice one of these:
- Several chips and rust patches
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Staining under the taps and around the waste
What your quote should include
- How changes to the job are handled
- When it can be used again
- What aftercare is recommended
- How your room will be protected
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- How many items we do on one visit
- How hard the colour is to match
- How many areas need work
- Any earlier repairs that need removing first
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say right away whether it can be repaired.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in Isle of Wight and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Where we work around Rew Street
Rew Street is about 1 mile south-west of Cowes, in Isle of Wight. Jobs in Rew Street are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We work in all 125 towns and villages across Isle of Wight. Our jobs stretch from Rew Street to London (75 miles away).
All of PO31 is within our area, from the main roads to the quietest streets. From Rew Street, Harness Lane and Westview Road or a nearby road, we can come to you. Neighbouring places we cover include Northwood (1 mile east), Gurnard (1 mile north-east), Cowes (1 mile north-east), Great Thorness (2 miles south-west) and Noke Common (2 miles south-east). Further out, we also cover Newport (4 miles south-east), Ryde (8 miles east), Sandown (10 miles south-east), Shanklin (10 miles south-east), Ventnor (12 miles south-east) and Oakfield (8 miles east). Some remote addresses need extra planning, so call us to arrange it.
What’s near Rew Street
We visit homes around The Travellers Joy pub, Cowes Enterprise College and Northwood Primary School, among other places. A little further out are St Mary's Hospital (2.8 miles south-east) and Isle of Wight Natural History Centre (1 mile east). For a walk, there’s Mill Hill.
Nearby places to Rew Street
More services for Rew Street
Repair or replace in Rew Street?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Rew Street clients choose us
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- No need to remove anything
Take a look at our full price list and guide to resurfacing and replacement costs.
Looking after it afterwards
To keep it looking its best:
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
- Don’t let dyes or oils sit on the finish
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Your questions about bath re-enamelling in Rew Street
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do you work in Rew Street?
We do. Technicians travel to Rew Street from across the region, with no extra charge for travel.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How do I get a price for bath re-enamelling in Rew Street?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What we do, step by step
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we are done and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
- Keep children and pets away from the room on the day
Get a quote
Most clients in Rew Street get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
