Gwynedd · Wales
Bath Re-enamelling for Rhiwlas homes
Full bath re-enamelling and resurfacing at your home in Rhiwlas, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that won’t shift
Bath re-enamelling in Rhiwlas, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We work on basins & shower trays, cast iron baths and acrylic baths, and people most frequently call us about lots of chips and rust spots and a peeling or bubbling previous coating.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Where
- Rhiwlas (LL57)
- Region
- Gwynedd
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Places near Rhiwlas
Other services in Rhiwlas
What affects the price in Rhiwlas
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- Doing more than one item at once
- How much damage there is
- Where the damage is and how we get to it
- The type of damage
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- Your postcode, so we can check dates
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Rhiwlas questions
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Looking after it afterwards
Once the work has cured, treat it gently:
- Store bottles off the bath
- Keep suction mats out of the bath
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Signs you need bath re-enamelling in Rhiwlas
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Most people get in touch when they notice one of these:
- Staining under the taps and around the waste
- A coloured bath you want in white
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Questions to ask before booking
- Who turns up on the day
- When it can be used again
- How your room will be protected
- What happens if they find more damage
When we’d advise against a repair
Some jobs aren’t right for a repair, including:
- A bath split right through the body
- Steel that has corroded right through
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Landlords, agents and businesses in Rhiwlas
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Rhiwlas, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Covering Rhiwlas
Rhiwlas is about 4 miles south of Bangor, in Gwynedd. Whether you’re in the middle of Rhiwlas or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Rhiwlas is one of 165 towns and villages in Gwynedd we cover. We work right across the region, from Rhiwlas to Liverpool (about 52 miles away).
Every address in LL57 is within our area. You will find streets such as Chapel Street, Wesley Street and Stryd Bakehouse, all of which we cover. We also cover the places around Rhiwlas: Waen-pentir (1 mile north-west), Rhyd-y-groes (1 mile north), Pentir (1 mile north), Deiniolen (2 miles south) and Clwt-y-bont (2 miles south). Further out, we also cover Bangor (4 miles north), Caernarfon (6 miles west), Bethesda (3 miles east), Hirael (4 miles north), Upper Bangor (4 miles north) and Glanadda (3 miles north).
Near you in Rhiwlas
In Rhiwlas, that means homes near Church of St Cedol and Vaynol Arms. Rhiwlas’s nearest station is Bangor (Gwynedd) station, roughly 3.7 miles north. Well-known places in the area include Ysbyty Gwynedd Hospital NHS Trust (3 miles north-west) and Quarry Hospital (3.1 miles south). The countryside around Rhiwlas includes Spinnies Nature Reserve and Moel y Ci.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we do, step by step
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you are in Rhiwlas, and we will come back with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
