Gwynedd · Wales
Bath Re-enamelling in Rhoslan
Bath re-enamelling in and around Rhoslan: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- Chips and rust in more than one place
Bath re-enamelling in Rhoslan, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. We regularly repair pressed steel baths, acrylic baths and Victorian roll-tops, and the jobs we see most are staining under the taps and around the waste and an original cast iron bath that needs restoring.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Rhoslan (LL52)
- County
- Gwynedd
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Rhoslan?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Most people contact us after spotting one of these:
- A period or roll-top bath worth keeping
- Stains that won’t shift
- A peeling or bubbling previous coating
- Lots of chips and rust spots
What your quote should include
- Who will actually do the work
- If travel is included in the price
- What aftercare is recommended
- How the room is protected while they work
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
What we do, step by step
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for most of the day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Advice
FAQs for Rhoslan
Which areas do you work in?
We cover the whole UK, including Rhoslan and the rest of Gwynedd. Just include your postcode and we will offer you dates.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How long will the bath be out of use?
One day for most baths, ready the next day. We give you timings with the quote.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Covering Rhoslan
Rhoslan is about 20 miles south of Bangor, in Gwynedd. Anywhere in LL52, we come to you. Rhoslan is one of 165 places in Gwynedd we cover. Our nearest city page is Liverpool, about 64 miles away.
Here we cover the LL52 postcode area. Rhoslan sits on or near the B4411, which makes travel easy. Close by, we cover Llanystumdwy (2 miles south), Criccieth (2 miles south-east), Bryncir (2 miles north), Pentrefelin (3 miles east) and Chwilog (3 miles south-west). Within a short drive, we also cover Caernarfon (13 miles north), Pwllheli (8 miles south-west), Llanbeblig (13 miles north), Porthmadog (5 miles east), Blaenau Ffestiniog (14 miles east) and Morfa Nefyn (12 miles west).
What’s near Rhoslan
The nearest railway station is Criccieth station, roughly 2.1 miles south-east. Well-known places in the area include Ysbyty Alltwen (4.6 miles east) and Criccieth Castle (2.3 miles south-east). Open spaces near Rhoslan include Llyn Ystumllyn and Bryniau Ystumcegid.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- Never use suction bath mats
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Landlord and trade work in Rhoslan
Landlords, letting agents and housing providers in Rhoslan use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Also near Rhoslan
More services for Rhoslan
Why repair rather than replace?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
Take a look at our full price list and guide to resurfacing and replacement costs.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
