Gwynedd · Wales
Bath Re-enamelling for Chwilog homes
Bath re-enamelling in and around Chwilog: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
Work for landlords and builders
For anyone letting property in or around Chwilog, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Bath re-enamelling in Chwilog without replacing anything
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It normally takes one visit, with the bath ready to use the following day. If you’re dealing with a bath that stays dull however much you clean it and lots of chips and rust spots, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee in Chwilog and across Gwynedd.
- Location
- Chwilog (LL53)
- Area hub
- Gwynedd
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What bath re-enamelling costs
Resurfacing from £350. You will not pay by the hour. The price is based on:
- The colour and finish to match
- Doing more than one item at once
- What the surface is made of
- Any earlier repairs that need removing first
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- Your postcode, so we can check dates
- Any details about the material
- One picture of the entire bath
- Details of any past repairs
If you’re in Chwilog and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
What a repair cannot fix
In fairness, some problems need a different fix:
- A bath that is rusted through
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Places near Chwilog
Also in Chwilog
Your questions about bath re-enamelling in Chwilog
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your LL53 postcode.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
What we’re called out for in Chwilog
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- A coating lifting around the plughole
What to look for in a quote
- How soon you can use it again
- Who turns up on the day
- Whether the colour is mixed to match
- What prep work is covered
Our work in Chwilog
Chwilog is about 23 miles south of Bangor, in Gwynedd. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Chwilog is one of 165 places in Gwynedd we cover. We work right across the region, from Chwilog to Liverpool (about 67 miles away).
All of LL53 is covered. Whether you live on Cae Bodlondeb, Cae Capel and Groesfford or anywhere nearby, we can come to you. If you are just outside Chwilog, we cover Y Ffôr (2 miles west), Abererch (2 miles south-west), Llanystumdwy (3 miles east), Rhos-fawr (3 miles west) and Llwyn-hudol (3 miles south-west). Larger places within reach include Caernarfon (15 miles north), Pwllheli (4 miles south-west), Llanbeblig (15 miles north), Porthmadog (8 miles east), Morfa Nefyn (9 miles west) and Criccieth (4 miles east).
What’s near Chwilog
Locally, our jobs take us to homes close to St Garmon's Church, among other places. The nearest railway station is Penychain station, about 1.2 miles south of the centre. Other landmarks nearby include Bryn Beryl hospital (2.6 miles west) and Criccieth Castle (4.2 miles east). Green spaces nearby include Pen-ychain and Llyn Glasfryn.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Ensure the room can be ventilated
- Clear the area around the damage
- Keep children and pets away from the room on the day
Ask for a price
Send us a photo of the damage and a wider shot of the whole item, with your LL53 postcode, and we’ll come back with a fixed quote.
Related advice
How to care for the repair
Once the work has cured, treat it gently:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
