Hertfordshire · England
Bath Re-enamelling for Croxley Green homes
Bath re-enamelling across Croxley Green and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off

Bath re-enamelling in Croxley Green without replacing anything
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Whether it’s staining under the taps and around the waste and enamel that’s lost its shine and feels rough, we can typically put it right.
Every repair is covered by a one-year guarantee.

- Where
- Croxley Green (WD3, WD18)
- Region
- Hertfordshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Croxley Green: your questions answered
Do you cover Croxley Green?
Yes, we do. Repair technicians travel to Croxley Green from across the region, and the price is the same as everywhere else.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Croxley Green and nearby
Croxley Green is about 1 mile north-east of Rickmansworth, in Hertfordshire. Whether you are in the middle of Croxley Green or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 381 towns and villages across Hertfordshire. Our jobs stretch from Croxley Green to London (about 18 miles away).
All of WD3 and WD18 is within our area. Jobs here include addresses on New Road, Harvey Road and Bateman Road and the roads around them. Nearby, we also work in Holywell (1 mile east), Rickmansworth (1 mile south-west), Batchworth (1 mile south-west), Chorleywood West (2 miles west) and Moor Park (2 miles south). Within a short drive, we also cover Hemel Hempstead (7 miles north), St Albans (9 miles north-east), Welwyn Garden City (15 miles north-east), Harpenden (12 miles north), Hatfield (12 miles north-east) and Borehamwood (7 miles east).
Around Croxley Green
Our customers here include homes close to Rickmansworth School, Harvey Road Primary School and The Red House. Other local landmarks include St Oswald's Parish Church (less than half a mile north-east), Croxley Danes School (0.7 miles north-east) and Rickmansworth Park (1.1 miles west). Croxley Green’s nearest station is Rickmansworth station, roughly 1.3 miles west. A little further out are Watford General Hospital (1.8 miles east) and Hertfordshire Fire Brigade Museum (2.4 miles east). Green spaces nearby include Chorleywood Common and Tumbling Bay.
- Parks and local facilities nearby include Maple Cross and Mill End (2.2 miles south-west)
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take a full day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
How to get a price
Email us a photo of the damage and one of the entire item, with your WD3 postcode, and we will come back with a fixed quote.
Related advice
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- How many areas need work
- What kind of damage it is
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from pictures
When you take your photos, a few simple things make all the difference:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
- Natural light rather than flash
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.
Landlords, agents and businesses in Croxley Green
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams in Hertfordshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Repairing versus replacing in Croxley Green
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the next day. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- We leave the room as we found it
- Colour mixed on the day to match
- One-year guarantee on every repair
- CHAS and Constructionline accredited
Take a look at our pricing or resurfacing vs replacement cost guide.
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Towns and villages near Croxley Green
Other services in Croxley Green
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Looking after it afterwards
Nothing complicated is needed:
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.

