Warwickshire · England
Bath Re-enamelling in Ridge Lane
Problem with your bath in Ridge Lane? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Chips and rust in more than one place
Bath re-enamelling in Ridge Lane, done in place
We do not move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Whether it’s brown or grey marks that don’t clean off and an original cast iron bath that needs restoring, we can normally put it right, on cast iron baths, Victorian roll-tops and pressed steel baths alike.
All our work comes with a one-year guarantee.
- Where
- Ridge Lane (CV10)
- Area hub
- Warwickshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
We will always be straight with you, so here’s what a repair will not do:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Steel that has corroded right through
Send us pictures and we will tell you honestly before booking.
Materials we work on in Ridge Lane
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Ridge Lane and the surrounding area
Ridge Lane is about 5 miles north-west of Nuneaton, in Warwickshire. Whether you’re in the middle of Ridge Lane or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover 324 places across Warwickshire. We work right across the region, from Ridge Lane to Birmingham (about 15 miles away).
All of CV10 is within our area, from the main roads to the quietest streets. Streets in the area include Ridge Lane, Arden Forest Estate and Wakeford Close, all of which we cover. We also cover the places around Ridge Lane: Birchley Heath (1 mile south-west), Bentley (1 mile north-west), Oldbury (1 mile east), Baxterley (2 miles north-west) and Merevale (2 miles north). Further out, we also cover Nuneaton (5 miles south-east), Bedworth (6 miles south-east), Kenilworth (14 miles south), Fordbridge (9 miles south-west), Castle Vale (9 miles west) and Chilvers Coton (5 miles south-east).
Near you in Ridge Lane
In Ridge Lane, that means homes near The Queen Elizabeth Academy and the streets around them. Ridge Lane’s nearest station is Atherstone station, roughly 2 miles north. Other landmarks nearby include George Eliot Hospital (4.8 miles south-east) and Atherstone Heritage Centre (2 miles north-east).
Questions from Ridge Lane
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do you cover the whole of Warwickshire?
We work UK-wide, and that includes Ridge Lane. Prices do not change with location.
How much does bath re-enamelling cost in Ridge Lane?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What affects the price in Ridge Lane
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- What the surface is made of
- The colour and finish to match
A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.
How to get a fixed price
When you take your pictures, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
If you are in Ridge Lane and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Places near Ridge Lane
Also in Ridge Lane
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the following day.
Getting ready for the visit
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
- Let us know about parking or access
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Read more
Repair or replace in Ridge Lane?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- One-year guarantee on every repair
Take a look at our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
