Warwickshire · England

Bath re-enamelling & resurfacing in Baxterley, Warwickshire

Bath re-enamelling in Baxterley without the cost of replacing. Get a fixed price from your photos, then book a visit.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Baxterley?

What affects the price in Baxterley

Prices start from £350. You will know the full cost before you book. We look at:

  • Whether it’s a chip, crack, burn or wear
  • The material
  • The colour and finish to match
  • Where the damage is and how we get to it

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

Getting a price from pictures

You can take the photos on your phone. Just make sure we can see:

  • The material, if you know it
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • The postcode, so we can plan the visit

For a price in Baxterley, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Bath re-enamelling at your home in Baxterley

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. If you are dealing with enamel that’s lost its shine and feels rough and wear marks under the taps, we can help, on basins & shower trays, pressed steel baths and Victorian roll-tops alike.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Baxterley (CV9)
County
Warwickshire
Warranty
One year on every repair
Quote
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Questions from Baxterley

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

What happens after I send pictures?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

Can a failed resurfacing be redone?

Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

Is it worth repairing rather than replacing?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Do you cover the entire of Warwickshire?

The entire UK, including all of Warwickshire. Just include your postcode and we will offer you dates.

Will there be fumes?

Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.

Is there any odour?

It depends on the job, but frequently a little. Open windows and an extractor fan help.

Do you cover Baxterley?

Yes, we do. Repair technicians travel to Baxterley from across the region, with no extra charge for travel.

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Where we work around Baxterley

Baxterley is about 6 miles south-east of Tamworth, in Warwickshire. Whether you are in the middle of Baxterley or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 324 towns and villages in Warwickshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 14 miles away.

We work across CV9 and the streets around it. That includes homes on Main Road, Smithy Lane and Windmill Lane. We also cover the places around Baxterley: Bentley (1 mile south-east), Merevale (1 mile north-east), Grendon (2 miles north), Birchley Heath (2 miles south-east) and Ridge Lane (2 miles south-east). Further out, we also cover Nuneaton (6 miles south-east), Bedworth (8 miles south-east), Kenilworth (15 miles south), Fordbridge (9 miles south-west), Castle Vale (9 miles west) and Chilvers Coton (6 miles south-east).

Around Baxterley

Our customers here include homes close to Woodside CofE Primary School, St Mary The Church of Our Lady and The Queen Elizabeth Academy and the streets around them. The closest station to Baxterley is Atherstone station, roughly 1.8 miles east of the centre. Further afield, we also cover the area around Atherstone Heritage Centre (1.9 miles east) and Hartshill Castle (3.4 miles south-east). For a walk, there is Middleton Lakes RSPB reserve.

Map of Baxterley © OpenStreetMap contributors

Signs you need bath re-enamelling in Baxterley

Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.

Send us a photo if you notice any of these:

  • Enamel that’s lost its shine and feels rough
  • Several chips and rust patches
  • Staining under the taps and around the waste
  • A roll-top that is seen better days

Questions to ask before you book

  • Whether a trained technician does the job
  • How to look after the finish
  • What happens if they find more damage
  • How your room will be protected

Choosing a repair company

Repairing versus replacing in Baxterley

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.

Why Baxterley customers choose us

  • Straight answers about what a repair can do
  • Rooms protected and left tidy
  • Every repair guaranteed for a year
  • One price list for the entire UK

See our full price list or guide to resurfacing and replacement costs.

How the visit works

Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Mention any parking restrictions or tricky access
  • Keep a parking space free if you can

Get a quote

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Read more

For landlords and businesses

We work for landlords, letting agents and housing providers in Baxterley as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Keep suction mats out of the bath
  • Fix dripping taps quickly
  • Wash away dyes and oils after use
  • Clean with a soft cloth and mild detergent

Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Do not try to scrub a worn bath back to shine. It just wears the enamel further.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.