Northamptonshire · England
Bath re-enamelling & resurfacing in Ringstead, Northamptonshire
We travel to Ringstead for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Several chips and rust patches
- A coating lifting around the plughole
About our bath re-enamelling in Ringstead
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include an outdated colour you’d like to change and stains that won’t shift, in basins & shower trays, cast iron baths and pressed steel baths.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Where
- Ringstead (NN14)
- Region
- Northamptonshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- A bath split right through the body
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Nearby places to Ringstead
More services for Ringstead
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Ringstead and nearby
Ringstead is about 6 miles north of Rushden, in Northamptonshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover 364 places in Northamptonshire, from the larger towns to small villages. We work right across the region, from Ringstead to Birmingham (about 57 miles away).
Our visits in NN14 are booked in the same way as anywhere else. Jobs here include addresses on High Street, Cherry Street and Back Lane. If you are just outside Ringstead, we cover Denford (1 mile north-east), Raunds (2 miles south), Woodford (2 miles north-west), Great Addington (2 miles west) and Titty Ho (2 miles south). Further out, we also cover Corby (11 miles north-west), Kettering (7 miles west), Wellingborough (8 miles south-west), Rushden (6 miles south), Desborough (13 miles north-west) and Moulton (13 miles south-west).
Landmarks near Ringstead
Locally, our jobs take us to homes close to Kinewell Lake, Manor School and Sports College and Ringstead Church of England Primary School and the streets around them. Other local landmarks include Church of the Nativity of the Blessed Virgin Mary (within half a mile south-west) and The Cock Public House (1 mile north-east). Further afield, we also cover the area around Thrapston Chancery Lane (2.3 miles north). Green spaces nearby include Twywell Hills and Dales.
Repairing versus replacing in Ringstead
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- We will tell you if it’s not worth repairing
- Colour-matched on site
- Work done at your home or business
- Rooms protected and left tidy
Read our pricing and guide to resurfacing and replacement costs.
What we are called out for in Ringstead
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Clients normally contact us about:
- A coating lifting around the plughole
- Several chips and rust patches
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
What to look for in a quote
- What preparation is included
- How your room will be protected
- If travel is included in the price
- How changes to the job are handled
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- The size and number of damaged areas
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. You will see the full price before booking.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
How it works
We turn up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Point us to the nearest place to park
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Looking after it afterwards
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
- Do not leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs straight away
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Questions from Ringstead
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you cover the whole of Northamptonshire?
All of Northamptonshire, and the rest of the UK. Travel is included in the price.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
About our accreditations · Every repair comes with a one-year guarantee.
