Cornwall · England
Bath Re-enamelling for Rinsey homes
Full bath re-enamelling and resurfacing at your home in Rinsey, with a one-year guarantee on every repair.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
What we cannot put right
We won’t take on work that will not last, so these are the limits:
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly before you book.
What we work on
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
How we handle bath re-enamelling in Rinsey
Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We work on basins & shower trays, Victorian roll-tops and cast iron baths, and common reasons people contact us are a bath that stays dull however much you clean it and chips and rust in more than one place.
Every repair is covered by our one-year guarantee.
- Where
- Rinsey (TR13)
- Area hub
- Cornwall
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
For anyone letting property in or around Rinsey, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- How many areas need work
- Any earlier repairs that need removing first
- The material
- The type of damage
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send photos for a quote
You can usually get a fixed price without us visiting. To help us price it:
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes a full day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the following day.
Getting ready for the visit
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
Get a quote
Send us photos of the damage and a wider shot of the whole item, with your TR13 postcode, and we’ll reply with a fixed price.
Advice
Repair or replace in Rinsey?
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- We leave the room as we found it
- Most jobs done in one visit
Read our full price list and resurfacing vs replacement cost guide.
Also near Rinsey
What else we do in Rinsey
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Leave the bath for the full curing time before using it
- Have chips seen to early
- Avoid suction-cup mats
- Repair dripping taps early
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Your questions about bath re-enamelling in Rinsey
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
About Rinsey
Rinsey is about 4 miles west of Helston, in Cornwall. Our technicians come to homes and businesses in Rinsey and nearby villages, so you do not need to take anything anywhere. Our technicians cover 644 places in Cornwall, from the larger towns to small villages.
Our visits in TR13 work the same way as everywhere else we cover. Other places close to Rinsey include Hendra (1 mile north-west), Rinsey Croft (1 mile north-east), Pengersick (1 mile north-west), Praa Sands (1 mile north-west) and Ashton (1 mile north-east). Larger places within reach include Falmouth (13 miles east), Camborne (9 miles north), Redruth (11 miles north-east), Penzance (8 miles west), Helston (4 miles east) and Hayle (7 miles north).
Around Rinsey
In Rinsey, that means homes near Lion and Lamb pub and The Annunciation and the streets around them. Other landmarks nearby include The Shipwreck Centre (2.3 miles south-east) and Acton Castle (2.7 miles west). Green spaces nearby include The Loe and Tregonning Hill.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Do you need bath re-enamelling in Rinsey?
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
Keep an eye out for these signs:
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- An old resurfacing that is failing
- A bath in a colour that no longer suits
What to look for in a quote
- What the guarantee covers, and for how long
- When it can be used again
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
