Somerset · England
Bath Re-enamelling in Rodney Stoke
Full bath re-enamelling and resurfacing in Rodney Stoke, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Rodney Stoke without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We’re frequently asked to fix thin, worn enamel in places and an old resurfacing that’s failing, in cast iron baths, basins & shower trays and Victorian roll-tops.
Every repair comes with a one-year guarantee.
- Location
- Rodney Stoke (BS27)
- Region
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Rodney Stoke
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Is a repair better than a new one?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Also near Rodney Stoke
Also in Rodney Stoke
Rodney Stoke and the surrounding area
Rodney Stoke is about 4 miles north-west of Wells, in Somerset. Customers in Rodney Stoke get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Rodney Stoke is one of 640 places in Somerset we cover.
Here we cover the BS27 postcode area. Streets in the area include Stoke Street, Wells Road and Butts Lane, all of which we cover. We also cover the places around Rodney Stoke: Draycott (1 mile north-west), Westbury-sub-Mendip (1 mile south-east), Holly Brook (2 miles south-east), Nyland (2 miles west) and Easton (2 miles south-east). Larger places within reach include Bridgwater (14 miles south-west), Burnham-on-Sea (11 miles west), Wells (4 miles south-east), Midsomer Norton (11 miles east), Shepton Mallet (9 miles south-east) and Street (9 miles south).
Local landmarks in Rodney Stoke
Around Rodney Stoke, we work in homes near Church of St Leonard, Draycott and Rodney Stoke Church of England First School and Fairlands Middle School, among other places. A little further out are Goughs Motor Museum (2.7 miles north-west) and Mendip Hospital (5.7 miles south-east). Open spaces near Rodney Stoke include Black Down and Priddy Mineries.
How it works
You do not need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we’re there.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Advice
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Rodney Stoke clients choose us
- Normally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- One-year guarantee on every repair
See our pricing or guide to resurfacing and replacement costs.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Do not let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Do not leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Landlords, agents and businesses in Rodney Stoke
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Problems we can’t see until an old finish comes off
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Common problems we fix in Rodney Stoke
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- Lots of chips and rust spots
- Stains that won’t shift
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
Before booking anyone
- What prep work is covered
- How to look after the finish
- Whether there are any call-out or travel charges
- How your room will be protected
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
