Oxfordshire · England
Bath re-enamelling & resurfacing in Rowstock, Oxfordshire
Bath re-enamelling in and around Rowstock: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
Bath re-enamelling at your home in Rowstock
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. We regularly repair Victorian roll-tops, cast iron baths and acrylic baths, and people most often call us about brown or grey marks that don’t clean off and lots of chips and rust spots.
We stand behind the work with a one-year guarantee.
- Location
- Rowstock (OX11)
- Area hub
- Oxfordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Rowstock. The price comes down to:
- Access to the area
- The type of damage
- Any earlier repairs that need removing first
- The material
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
Good photos mean an accurate price. Here’s what helps:
- A close-up of the damage, in focus
- The material, if you know it
- A photo taken from further back
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
About Rowstock
Rowstock is about 3 miles west of Didcot, in Oxfordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Rowstock is one of 443 towns and villages in Oxfordshire where we work. Our nearest city page is London, about 53 miles away.
We work across OX11. Whether you live on Tudor Walk, Wantage Road and Reading Road or anywhere nearby, we can come to you. Nearby, we also work in East Hendred (1 mile west), West Hendred (2 miles west), Ardington (3 miles west), East Lockinge (3 miles west) and West Ilsley (4 miles south). Within a short drive, we also cover Oxford (11 miles north), Didcot (3 miles east), Abingdon-on-Thames (5 miles north), Witney (15 miles north-west), Wantage (5 miles west) and Grove (5 miles west).
What’s near Rowstock
We visit homes around UTC Oxfordshire, Old Chequers pub and Church of St Matthew and the streets around them. Rowstock’s nearest station is Didcot Parkway station, about 3 miles east. A little further out are Atlas Computer Laboratory (1.7 miles south) and Abingdon Community Hospital (4.9 miles north). Green spaces nearby include Mowbray Fields and Churn Hill.
What we cannot put right
A repair isn’t right for every job, including:
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Work for landlords and builders
For anyone letting property in or around Rowstock, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Nearby places to Rowstock
What else we do in Rowstock
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day, tidy-up included.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Make sure the area is dry
How to get a price
If you are in Rowstock and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Rowstock questions
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Can a failed resurfacing be redone?
Generally, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you cover Rowstock?
Yes, we do. Technicians travel to Rowstock from across the region, and the price is the same as everywhere else.
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs straight away
- Have chips seen to early
- Fix dripping taps quickly
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Do you need bath re-enamelling in Rowstock?
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Look out for these signs:
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Stains that will not shift
Before you book anyone
- How the room is protected while they work
- How changes to the job are handled
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
