Staffordshire · England
Bath Re-enamelling for Rudge Heath homes
Our technicians come to Rudge Heath for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that is seen better days
When to call us in Rudge Heath
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Contact us if you’ve noticed:
- An outdated colour you’d like to change
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
Questions to ask before booking
- Whether the price covers travel
- Who will actually do the work
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
About our bath re-enamelling in Rudge Heath
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. If you’re dealing with an outdated colour you’d like to change and chips and rust in more than one place, we can usually put it right, on cast iron baths, basins & shower trays and Victorian roll-tops alike.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Area
- Rudge Heath (WV5)
- County
- Staffordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Rudge Heath
Rudge Heath is about 5 miles east of Bridgnorth, in Staffordshire. Our technicians come to clients in Rudge Heath and nearby villages, so you don’t need to take anything anywhere. Rudge Heath is one of 512 places in Staffordshire where we work. You can also see our page for Birmingham, about 18 miles away.
Our visits in WV5 work the same way as everywhere else we cover. Other places close to Rudge Heath include Hilton (1 mile west), Claverley (1 mile south), Wyken (2 miles west), Kingslow (2 miles north) and Worfield (2 miles west). We also work in nearby towns such as Wombourne (5 miles east), Penkridge (14 miles north-east), Great Wyrley (14 miles north-east), Codsall (7 miles north-east), Littlewood (14 miles north-east) and Cheslyn Hay (14 miles north-east).
Around Rudge Heath
A little further out are Bridgnorth Community Hospital (5 miles west) and Midland Motor Museum (3.7 miles south-west).
Rudge Heath: your questions answered
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How long will the bath be out of use?
One day for most baths, ready the following day. We give you timings with the quote.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
Can you quote from pictures?
Generally, yes. Clear photos let us give you a fixed price without visiting.
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Rudge Heath
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Other services in Rudge Heath
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Aftercare tips
So the finish stays in good condition for years:
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Repairing versus replacing in Rudge Heath
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why Rudge Heath customers choose us
- Colour mixed on the day to match
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- Everything repaired in place
See our full price list and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- Access to the area
- What the surface is made of
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Two or three clear photos are usually enough. Try to include:
- The material, if you know it
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
